Atotp
Quick Guide
Wi-Reader
DW09
[pic]
Copyright © 2011, Carry Technology Co., Ltd. All Right Reserved
Table of Content
Chapter 1: Introduction ………………………………..………2 1.1 Introduction ……..………………………………………………....2 1.2 Hardware Features ……..………………………………………………....3 1.3 Software Features ……..………………………………………………....4 1.4 Package Contents ……..………………………………………………....4
Chapter 2: Hardware Installation …………………………...5 2.1 How to install Network function ……………..……..…….……5 2.2 How to start reader and charger function ……………..……..…….……5 2.3 Interface & LED Indicators Description …………..………….………...6
Chapter 3: Wireless and Network Setup …………...……8 3.1 Default Network setting for Wi-Reader ……………………..…………8 3.2 Configure Network setting for Wi-Reader on Gateway Mode ………….8 3.3 Configure Network setting for Wi-Reader on WiFi Repeater Mode ….14 3.4 Upgrade Firmware for Wi-Reader ……………………………...23
Chapter 4: How to use Wi-Reader Storage Function …….24 4.1 Use Wi-Reader Storage Function by Native Browser – Safari .………25 4.2 Use Wi-Reader Storage Function by Wi-Reader App ……….28
Chapter 1: Introduction
1.1 Introduction
Thank you for purchasing Wi-Reader Mobile Multi-purpose Wireless Storage device.
Wi-Reader is a portable wireless AP/Router with up to 150Mbps transmission rate. It supports two main working modes: Wireless storage (UFD or SD etc…) and Wireless Router / AP (Access Point). For Wireless Storage function, it can support HTTP File Server for iPad / iPhone native browser like Safari or iOS App Wi-Reader (HTTP / FTP File Server) based on storage media with FAT16, FAT32, exFAT and NTFS File System. You can only use one storage device (SD or UFD) at the same time.
Wi-Reader can be powered from USB Power Adapter or PC/Notebook with USB port. Wi-Reader has embedded battery, you can use the external power for charging the embedded battery of Wi-Reader.
1.2 Hardware Features
|Standard
Wi-Reader
DW09
[pic]
Copyright © 2011, Carry Technology Co., Ltd. All Right Reserved
Table of Content
Chapter 1: Introduction ………………………………..………2 1.1 Introduction ……..………………………………………………....2 1.2 Hardware Features ……..………………………………………………....3 1.3 Software Features ……..………………………………………………....4 1.4 Package Contents ……..………………………………………………....4
Chapter 2: Hardware Installation …………………………...5 2.1 How to install Network function ……………..……..…….……5 2.2 How to start reader and charger function ……………..……..…….……5 2.3 Interface & LED Indicators Description …………..………….………...6
Chapter 3: Wireless and Network Setup …………...……8 3.1 Default Network setting for Wi-Reader ……………………..…………8 3.2 Configure Network setting for Wi-Reader on Gateway Mode ………….8 3.3 Configure Network setting for Wi-Reader on WiFi Repeater Mode ….14 3.4 Upgrade Firmware for Wi-Reader ……………………………...23
Chapter 4: How to use Wi-Reader Storage Function …….24 4.1 Use Wi-Reader Storage Function by Native Browser – Safari .………25 4.2 Use Wi-Reader Storage Function by Wi-Reader App ……….28
Chapter 1: Introduction
1.1 Introduction
Thank you for purchasing Wi-Reader Mobile Multi-purpose Wireless Storage device.
Wi-Reader is a portable wireless AP/Router with up to 150Mbps transmission rate. It supports two main working modes: Wireless storage (UFD or SD etc…) and Wireless Router / AP (Access Point). For Wireless Storage function, it can support HTTP File Server for iPad / iPhone native browser like Safari or iOS App Wi-Reader (HTTP / FTP File Server) based on storage media with FAT16, FAT32, exFAT and NTFS File System. You can only use one storage device (SD or UFD) at the same time.
Wi-Reader can be powered from USB Power Adapter or PC/Notebook with USB port. Wi-Reader has embedded battery, you can use the external power for charging the embedded battery of Wi-Reader.
1.2 Hardware Features
|Standard