Ccna-Voice Voip

Voice Gateway Router Internet

10 Step to configure Cisco Call Manager Express
Configuring Inter-VLAN Routing
Router# configure terminal Router(config)# interface fa0/0 Router(config-if)# no ip address Router(config-if)# exit Router(config)# interface fa0/0.10 Router(config-subif)# description ROUTER INTERFACE FOR VOICE VLAN Router(config-subif)# encapsulation dot1q 10 Router(config-subif)# ip address 172.16.1.1 255.255.255.0 Router(config-subif)# ip helper-address 172.16.2.5 Router(config-subif)# exit Router(config)# interface fa0/0.50 Router(config-subif)# description ROUTER INTERFACE FOR DATA VLAN Router(config-subif)# encapsulation dot1q 50 Router(config-subif)# ip address 172.16.2.1 255.255.255.0

2

2 Line

PSTN Network

ine co n n e Voice ct PBX w ith Gatew ay

Vo ic

eL

Analog Line Prepared By Marc Kamel System Engineer

Cisco Call Manager Express

SwitchA

Configuring a Router-Based DHCP Server RTR# configure terminal RTR(config)# ip dhcp excluded-address 172.16.1.1 172.16.1.9 RTR(config)# ip dhcp excluded-address 172.16.2.1 172.16.2.9 RTR(config)# ip dhcp pool DATA_SCOPE RTR(dhcp-config)# network 172.16.2.0 255.255.255.0 RTR(dhcp-config)# default-router 172.16.2.1 RTR(dhcp-config)# dns-server 4.2.2.2 RTR(dhcp-config)# exit RTR(config)# ip dhcp pool VOICE_SCOPE RTR(dhcp-config)# network 172.16.1.0 255.255.255.0 RTR(dhcp-config)# default-router 172.16.1.1 RTR(dhcp-config)# option 150 ip 172.16.1.1WAN_RTR(dhcp-config)# dns-server 4.2.2.2 Setting the Clock of a Cisco Device with NTP WAN_RTR# configure terminal WAN_RTR(config)# ntp server 64.209.210.20 WAN_RTR(config)# clock timezone Cairo +2 Installing CME Files into Flash Memory
CME_Voice# archive tar /xtract tftp://172.16.2.5/cme-full-4.3.0.0.tar flash:

3

4 5 6

Desktop with Cisco IP Communicator

1
Configuring a Switch Trunk Port
SwitchA(config-if)# switchport trunk encapsulation dot1q SwitchA(config-if)# switchport mode trunk

Configuring Router-Based TFTP Services for IP Phone Firmware Files

Creating