OWNER:
LOCATION:
GENERAL SPECIFICATION
This set of Specifications shall govern the methods of construction and the kind of materials to be used for the proposed project shown on the accompanying plans and details drawings. The plans, details drawings and the Specifications shall be considered as complementing each other so that what is mentioned or shown in one, although not mentioned or shown in the other, shall be considered as appearing in both. In case of conflict between the two, the same should be referred to the designing Architect / Engineer for clarification.
GENERAL CONDITIONS
All parts of the construction shall be finished with first class workmanship to the fullest talent and meaning of the plan and Specification, and to the entire satisfaction of the Architect / Engineer and the owner.
Any defective material or poor workmanship shall be replaced or improved by the Contractor without additional cost for the owner.
The construction shall conform to all the requirements of the National Building Code, as well as the rules and regulations in the locality.
CLEARING THE SITE
The building site shall be leveled according to the plans, and cleared of rubbish, roots and other perishable and objectionable matters to a suitable grade.
Such unsuitable materials shall be spread over the areas adjacent to the proposed building, or disposed of as may be directed by the Architect or Engineer in charge of the construction.
STEAKING OUT THE BUILDING LINES
The building lines shall be staked out and all lines and grades shown in the drawing established before any excavation is started. Batter board reference marks shall be erected at such places where they will not be disturbed during the excavation of the building’s foundation.
EXCAVATION
All excavation shall be made