Correctly Mix all sorts of Mud Additive by Kosun Premix Mud Tank Method
The premix mud tank plays a very important part inside the prepare stage before drilling. As Maximumly and effectively mix all types of fluids, polymer, mud additive just isn't only save the material and labor expense,but additionally expedite penetration rate in the down hole.
1.Kosun mud tank would be the prevalent volume for one mixing mud tank within the US. We are going to introduce what type of kosun units set up around the premix tank:
(1). Size of mud tank will probably be the same because the 40’ container 40 ft length eight ft width and 8 ft height. Sandblast just before painting and two epoxy zinc. KOSUN apply the international brand anti-abrasive paint.
(2). Kosun WNJ11 mud agitators are mounted on the top rated in the mixing tank with 15HP motor. The impeller will probably be 33.5 inch for the double impeller. The shaft connects with stabilizer which can be on the bottom of mud tank. Explosion proof motor assure the safe difficulties.
(3). Kosun mud is also a crucial tool for mixing tank. It truly is mostly suspend all the sediment on the corner or edge of mud tank. http://www.kosungroup.com/products/solids-control-equipment/jet-mud-mixer.html
(4). Kosun Jet mud mixer is a single jet mud mixer combined with 45 Kw (or 55 Kw) drilling mud centrifugal pump and a jet mud hopper or a double drilling mud jet mud mixer of two pumps and two hoppers.Kosun Jet mud mixer is achieving the properties have to have for drilling mud like viscosity for hole cleaning.
2.KOSUN Premix tank can also be offered for manufacturing facility testing components for downhole tools and smaller drilling project. One example is, 1 of our clientele call for a GN tiny skid-mounted mixing tank for testing their downhole tools, which is about 80 bbl,18 ft extended,7ft wide and 4 ft height. The little mixing is also installed with 5HP or 7.five HP mud agitator and 15HP centrifugal pump with hopper. Relating to to the distinct testing requirement, we are also able to
1.Kosun mud tank would be the prevalent volume for one mixing mud tank within the US. We are going to introduce what type of kosun units set up around the premix tank:
(1). Size of mud tank will probably be the same because the 40’ container 40 ft length eight ft width and 8 ft height. Sandblast just before painting and two epoxy zinc. KOSUN apply the international brand anti-abrasive paint.
(2). Kosun WNJ11 mud agitators are mounted on the top rated in the mixing tank with 15HP motor. The impeller will probably be 33.5 inch for the double impeller. The shaft connects with stabilizer which can be on the bottom of mud tank. Explosion proof motor assure the safe difficulties.
(3). Kosun mud is also a crucial tool for mixing tank. It truly is mostly suspend all the sediment on the corner or edge of mud tank. http://www.kosungroup.com/products/solids-control-equipment/jet-mud-mixer.html
(4). Kosun Jet mud mixer is a single jet mud mixer combined with 45 Kw (or 55 Kw) drilling mud centrifugal pump and a jet mud hopper or a double drilling mud jet mud mixer of two pumps and two hoppers.Kosun Jet mud mixer is achieving the properties have to have for drilling mud like viscosity for hole cleaning.
2.KOSUN Premix tank can also be offered for manufacturing facility testing components for downhole tools and smaller drilling project. One example is, 1 of our clientele call for a GN tiny skid-mounted mixing tank for testing their downhole tools, which is about 80 bbl,18 ft extended,7ft wide and 4 ft height. The little mixing is also installed with 5HP or 7.five HP mud agitator and 15HP centrifugal pump with hopper. Relating to to the distinct testing requirement, we are also able to