Export Procedure

Application Of Lean Manufacturing Tools In Garments Production

By
Md. Abu Hayen Peash
ID: 081-23-757

This Report Presented in Partial Fulfillment of the Requirements for the Degree of Bachelor of Science in Textile Engineering

Supervised By

Engr. Md. Mahfuzur Rahman
Senior Lecturer
Department of Textile Engineering Daffodil
International University

DAFFODIL INTERNATIONAL UNIVERSITY
DHAKA, BANGLADES
JANUARY, 2012

©Daffodil International University

DECLARATION

I hereby declare that, this project has been done by me under the supervision of Engr.
Md.Mahfuzur Rahman, Senior Lecturer, Department of Textile Engineering, Daffodil
International University. I also declare that neither this project not any part of this project have been submitted elsewhere for award of any degree or diploma.

Supervised by:

Engr. Md.Mahfuzur Rahman
Senior Lecturer
Department of Textile Engineering
Daffodil International University

Submitted by:
Md.Abu Hayen Peash
ID: 081-23-757
Department of Textile Engineering
Daffodil International University

©Daffodil International University

ACKNOWLEDGEMENT

First I would like to express my heartiest thanks and gratefulness to almighty Allah for His divine blessing makes me possible to complete this project successfully.

I fell grateful to and wish my profound my indebtedness to Engr. Md. Mahfuzur Rahman ,
Senior lecturer , Department of Textile Engineering Daffodil International University, Dhaka.
Deep Knowledge & keen interest of my supervisor in the field of garments production influenced me to carry out this project .His endless patience ,scholarly guidance ,continual encouragement , constant and energetic supervision, constructive criticism , valuable advice
,reading many inferior draft and correcting them at all stage have made it possible to complete this project.

I would like to express my heartiest gratitude to Ranjan Sinhabahu, CEO of International
Classic Composite