Factors that impact crushing and screening plant in practice

Now in the actual production process, the production of mineral processing to meet the need

to improve the efficiency of
Crushing And Screening

Plant guarantee ore into the mill pass premise.

First, the nature of the materials is one of the factors that affect the efficiency

Crushing And Screening Plant. Ore hardness is an important factor affecting the broken ore

hardness is objective, can not be overcome. Hardness greater the harder broken; hardness more

brittle, more easily broken. Granular materials. Feed size, the lower the crushing

efficiency; to mine the more fine-grained level, the higher the crushing and screening

efficiency. Material in the mud, water content. Clay, the greater the water content, the

lower the crushing and screening efficiency, when the water content of the ore is greater

than 5%, more influence, when moisture increased to 8 to 12%, the most severely affected, but

the material in the water than this When the range, the viscosity of the material but

weakened, while significantly reducing its adverse effects. Conversely, the higher the

crushing and screening efficiency. Materials containing mineral mud or other sticky

substances, not even water, is also bonded into a group, resulting in blockage of crushing

and screening equipment, general processing such ores, increasing some washing process,

carried off the mud, broken sieve for improving of efficiency is very beneficial.

Second, improve the efficiency of Crushing And Screening Plant, crushing and screening

equipment can not be separated, the structure also affects the efficiency of the equipment

production capacity and equipment. Broken equipment commonly used in the production of

various models are made of jaw crusher, cone crusher composition, segmented broken. To

properly broken than the basic equipment of each device to achieve the appropriate row of ore

feed size and granularity. Jaw crusher