How to Put Together a Desktop Computer Tower

As a teenager I was always fond of computer. I built my first desktop computer in 2009 when I was able to afford purchasing all the components myself. In March of 2012 my desktop had a power surge and short-circuited the motherboard, rendering the rest of the components useless. I tore apart the desktop tower and inspected all my components to see what would be reusable. The power supply, video card, CD optical drive, and hard drive could all be salvaged. I placed all the salvaged components in an anti-static bag and stored them in a dry and relatively cool area in my closet. Once I knew what components and new hardware I would need I began researching all the new products in the market. I realized my once top of the line components were outdated but, being poor I had to make due with my salvaged parts. The list of components needed was concise, but rather expensive. I needed a new motherboard, central processing unit, processor cooler, and a new desktop computer tower case. I had to wait and save another paycheck to buy all the necessary components. As soon as all my components arrived I cleared approximately a five by five foot flat surface in my living room and laid all my components down in their boxes. I first unboxed my tower case and read the manual of its capabilities and how its fans are set up. I then opened all the rest of the boxes and laid out each component. Inspection of each component is a must at this point. If you’re able to find damage before you put your computer together it’ll save you the time of disassembling your computer once you’ve found out something has malfunctioned. If you’re lucky like I was you will not have any damaged parts and you can continue to assemble your computer rig. The first step to assembling the computer is to install your central processing unit. In my case, I had to install both the central processing unit and the processor cooler on the motherboard before mounting it in the tower case. Once that was installed I