Pros And Cons Of Automatic Garage Doors
More than 90% of repair issues are configured by garage door companies as working with these doors is quite unsafe and can result in serious injuries.
Few common issues with solutions are :
1. Garage door doesn't open or close : One of the most common problem with automatic garage doors is that many a times they don't open or close at all. The reason may be a faulty opener. To offer a repair, check the remote and reprogram the opener. To fix the problem on temporary basis, switch the door to operate manually. This can be done by activating the door pulley and cutting the automatic opener supply. Disconnecting the red cord from the pulley will allow the door to operate manually.
2. The door gets stuck in the middle : If an overhead door gets
stuck in the middle while opening or closing, then the problem is increased friction which is not letting the door to operate smoothly. Most likely, the chances are that the movable parts of the door aren't properly lubricated. For an easy solution, apply a good quality lubricant on the metal rollers and hinges. If a lubricating agent isn't available at moment, use coconut oil. Regular maintenance of a garage door is necessary to avoid such problems. Its better to call a garage door repair service for servicing a door thoroughly, at least once in a year.
3. The door falls when released : An overhead door is manufactured using springs that prevents it from falling immediately, after it has been released. If a door falls down with sudden force, then most probably, either the door extension springs are worn out or are damaged or cracked. The only solution to this problem is getting the torsion and extension spring replaced from an expert door technician.
4. The door gets stuck from time to time : A stinking garage door is a serious issue, as it can fall off any time while operating, thereby increasing the risk of causing injuries. If a door is causing problems from time to time, the reason may be the loose hardware parts such as bolts and nuts or a damaged metal track. The repair solution for this problem is tightening various door elements and striking the door tracks with a hammer, so as to remove any unevenness. This is a temporary solution. It will be a good decision to call in a professional to look into the problem to offer proper and effective repair.
Few common issues with solutions are :
1. Garage door doesn't open or close : One of the most common problem with automatic garage doors is that many a times they don't open or close at all. The reason may be a faulty opener. To offer a repair, check the remote and reprogram the opener. To fix the problem on temporary basis, switch the door to operate manually. This can be done by activating the door pulley and cutting the automatic opener supply. Disconnecting the red cord from the pulley will allow the door to operate manually.
2. The door gets stuck in the middle : If an overhead door gets
stuck in the middle while opening or closing, then the problem is increased friction which is not letting the door to operate smoothly. Most likely, the chances are that the movable parts of the door aren't properly lubricated. For an easy solution, apply a good quality lubricant on the metal rollers and hinges. If a lubricating agent isn't available at moment, use coconut oil. Regular maintenance of a garage door is necessary to avoid such problems. Its better to call a garage door repair service for servicing a door thoroughly, at least once in a year.
3. The door falls when released : An overhead door is manufactured using springs that prevents it from falling immediately, after it has been released. If a door falls down with sudden force, then most probably, either the door extension springs are worn out or are damaged or cracked. The only solution to this problem is getting the torsion and extension spring replaced from an expert door technician.
4. The door gets stuck from time to time : A stinking garage door is a serious issue, as it can fall off any time while operating, thereby increasing the risk of causing injuries. If a door is causing problems from time to time, the reason may be the loose hardware parts such as bolts and nuts or a damaged metal track. The repair solution for this problem is tightening various door elements and striking the door tracks with a hammer, so as to remove any unevenness. This is a temporary solution. It will be a good decision to call in a professional to look into the problem to offer proper and effective repair.