Study of the mechanical properties and corrosion behaviour of AISI 304L by varying welding parameters
Study of the mechanical properties and corrosion behaviour of AISI 304L by varying welding parameters by Abdus Samad Anwar, 070601
Rajesh Kumar, 070646
A Project Report submitted in partial fulfillment of the requirements for the degree of
Bachelor of Technology in Metallurgical and Materials Engineering
Supervised by
Prof V.K.Tewari
Department of Metallurgical and Materials Engineering
Indian Institute of Technology Roorkee
May 2011
CANDIDATE’S DECLARATION
This is to certify that the work which is being hereby presented by us in this project titled
Study of the mechanical properties and corrosion behaviour of AISI 304L by varying welding parameters in Partial fulfillment of the award of the Bachelor of Technology submitted at the
Department of Metallurgical and Materials Engineering, IIT Roorkee, is a genuine account of our work carried out during the period from August 2010 to May 2011 under the guidance of
Prof V.K.Tewari, Department of Metallurgical and Materials Engineering, IIT Roorkee.
The matter embodied in the project report to the best of our knowledge has not been submitted for the award of any other degree elsewhere.
Dated: May 20, 2011
Abdus Samad Anwar
Rajesh Kumar
This is to certify that the above declaration by Abdus Samad Anwar and Rajesh Kumar is true to the best of my/our knowledge.
Dr. V.K.Tewari
Professor
Dept. of Metallurgical and Materials Engg.
IIT Roorkee
ii
ACKNOWLEDGEMENTS
We express our deepest gratitude towards Dr. V.K.Tewari, Professor, Department of
Metallurgy and Materials Engineering, IIT Roorkee who encouraged us to take this project as well as for his guidance, advice and support throughout the span of the B.Tech Project.
Without his help the project would not have been completed.
We are deeply obliged Dr. R.C. Agarwala, Professor, Department of Metallurgy and Materials
Engineering, IIT Roorkee who acted as our Co-ordinator and mentor and gave us useful inputs in
Rajesh Kumar, 070646
A Project Report submitted in partial fulfillment of the requirements for the degree of
Bachelor of Technology in Metallurgical and Materials Engineering
Supervised by
Prof V.K.Tewari
Department of Metallurgical and Materials Engineering
Indian Institute of Technology Roorkee
May 2011
CANDIDATE’S DECLARATION
This is to certify that the work which is being hereby presented by us in this project titled
Study of the mechanical properties and corrosion behaviour of AISI 304L by varying welding parameters in Partial fulfillment of the award of the Bachelor of Technology submitted at the
Department of Metallurgical and Materials Engineering, IIT Roorkee, is a genuine account of our work carried out during the period from August 2010 to May 2011 under the guidance of
Prof V.K.Tewari, Department of Metallurgical and Materials Engineering, IIT Roorkee.
The matter embodied in the project report to the best of our knowledge has not been submitted for the award of any other degree elsewhere.
Dated: May 20, 2011
Abdus Samad Anwar
Rajesh Kumar
This is to certify that the above declaration by Abdus Samad Anwar and Rajesh Kumar is true to the best of my/our knowledge.
Dr. V.K.Tewari
Professor
Dept. of Metallurgical and Materials Engg.
IIT Roorkee
ii
ACKNOWLEDGEMENTS
We express our deepest gratitude towards Dr. V.K.Tewari, Professor, Department of
Metallurgy and Materials Engineering, IIT Roorkee who encouraged us to take this project as well as for his guidance, advice and support throughout the span of the B.Tech Project.
Without his help the project would not have been completed.
We are deeply obliged Dr. R.C. Agarwala, Professor, Department of Metallurgy and Materials
Engineering, IIT Roorkee who acted as our Co-ordinator and mentor and gave us useful inputs in