The Crushing Chamber Features of the Cone Crusher

This series of cone crushers are used for crushing ores and rocks, and the advantages are: reliable structure, high efficiency, easy-to-adjust and economical. There is Spring cone crusher, Symons cone crusher. The safety spring system is the overload protection device, which makes foreign material goes through the machine without bring any hurt to it. The sealing modes are oil and water, which segregate the stone powder and lubricating system. The crushing chamber is decided by the purpose of ore, the standard model is suitable for medium crushing; the medium model is suitable for fine crushing and the short head model is suitable for fine crushing.
The installation of the main parts of the machine maintains the same for the purpose of convenient to the installation and maintenance, saving investment and optimization of the crushing effects. Adopting the pentagon crushing chamber, and on the condition of keeping the original designed crushing ratio and the structural size of the crushing machine the same, increase the biting angle and prolong the parallel band. there is only little time for them to stay in the crushing chamber, and the quantity of the rocks in the chamber is small so that the opportunity for the rocks to impact, rub and run into with each other is few, for this reason, some long and flat rocks are directly discharged out of the crushing chamber without being broken. Secondly, part of the ores is only crushed for once so that it cannot reach the granularity requirement of the final products. Thirdly, the rocks get huge functions before going onto the parallel band, so that part just flies out of the crushing chamber without being impacted. The last but not the least,
The crushing chamber of the cone crusher that is optimized and reformed adopts the lamination crushing principle and designed as the trapezoid structure. At the same time, the materials can be kept on the upper part of the crushing chamber for a little while which will increase the