Traffic Load Report

Student Name
Luis A Mejias
Date
4-06-2014_
SEC450 Database Traffic Load Lab Report

NOTE: Use carriage returns and page breaks as needed to prevent table contents from extending across page boundaries.

Task 1—Verify Initial Connectivity Between Router and Hosts

Run a Flow Analysis to update the topology. Open the Visual CLI on the ISP router and ping all of the Servers and Host PCs including the Attack PC. Use the IP addresses indicated on the network topology page. Select the commands you entered in the Virtual CLI using the mouse and click on the Copy button. Use V to paste the commands into the table cell provided below.

Paste Virtual CLI Ping Commands here.
ISP_Router>en
ISP_Router#ping 192.168.200.10

Type escape sequence to abort.
Sending 5 100-byte ICMP Echos to 192.168.200.10, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 0/0/0 ms
ISP_Router#ping 192.168.200.11

Type escape sequence to abort.
Sending 5 100-byte ICMP Echos to 192.168.200.11, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 0/0/0 ms
ISP_Router#ping 200.100.0.10

Type escape sequence to abort.
Sending 5 100-byte ICMP Echos to 200.100.0.10, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 0/0/0 ms
ISP_Router#ping 200.100.40.99

Type escape sequence to abort.
Sending 5 100-byte ICMP Echos to 200.100.40.99, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 0/0/0 ms
ISP_Router#ping 192.168.100.10

Type escape sequence to abort.
Sending 5 100-byte ICMP Echos to 192.168.100.10, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 0/0/0 ms
ISP_Router#ping 192.168.100.11

Type escape sequence to abort.
Sending 5 100-byte ICMP Echos to 192.168.100.11, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 0/0/0 ms
ISP_Router#