ZTE MF65 User Manual
Getting to Know Your Device
Getting started with your device.
NOTE:
Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged work in such space may cause excessive heat and raise ambient temperature, which may lead to automatic shutdown of the device for your safety.
In the case of such event, cool the device in a well-ventilated place before turning on for normal use.
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
1
Blue solid
WPS is active.
Wi-Fi is off or your device is in sleep mode.
Red solid/ blinking The battery is low. Please charge the battery.
Green blinking
Your device is in standby mode and not being charged, or the battery is not inserted.
Via Wi-Fi
2. Power on your device.
3. The OS detects and recognizes new hardware and finishes the installation automatically.
NOTE:
If the system does not launch installation automatically, you can run the installation program in path of My Computer > ZTEMODEM.
4. Wait a moment, and then the client will connect to your device successfully. Installing Your Device
1. Slide the back cover and remove it
4. Insert the battery.
Your device supports two methods to connect to the Internet and supports multi-clients for surfing on the Internet at the same time. The following figure is only for your reference.
• 3G Mode: Use your (U)SIM card to access the Internet.
NOTE: Please set the client to obtain an IP address automatically referring to the chapter “Configuring your PC”, and then the client will get an IP address like “192.168.0.101”.
3. Select the SSID of your device, and then click Connect.
2. Insert the (U)SIM card.
WARNING: Do not use nonstandard or incompatible SIM card. Otherwise your modem may be damaged.
is a trademark of SD Card Association.
Accessing the Internet
3G Mode
After the client connected to your device successfully, you can access the
Getting started with your device.
NOTE:
Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged work in such space may cause excessive heat and raise ambient temperature, which may lead to automatic shutdown of the device for your safety.
In the case of such event, cool the device in a well-ventilated place before turning on for normal use.
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
1
Blue solid
WPS is active.
Wi-Fi is off or your device is in sleep mode.
Red solid/ blinking The battery is low. Please charge the battery.
Green blinking
Your device is in standby mode and not being charged, or the battery is not inserted.
Via Wi-Fi
2. Power on your device.
3. The OS detects and recognizes new hardware and finishes the installation automatically.
NOTE:
If the system does not launch installation automatically, you can run the installation program in path of My Computer > ZTEMODEM.
4. Wait a moment, and then the client will connect to your device successfully. Installing Your Device
1. Slide the back cover and remove it
4. Insert the battery.
Your device supports two methods to connect to the Internet and supports multi-clients for surfing on the Internet at the same time. The following figure is only for your reference.
• 3G Mode: Use your (U)SIM card to access the Internet.
NOTE: Please set the client to obtain an IP address automatically referring to the chapter “Configuring your PC”, and then the client will get an IP address like “192.168.0.101”.
3. Select the SSID of your device, and then click Connect.
2. Insert the (U)SIM card.
WARNING: Do not use nonstandard or incompatible SIM card. Otherwise your modem may be damaged.
is a trademark of SD Card Association.
Accessing the Internet
3G Mode
After the client connected to your device successfully, you can access the