temperature. For instance cold water is denser than warm water; ice is less dense than both. The method used for determining the density of a substance depends on the nature of the substance. In this lab the densities of unknown irregularly shaped solids and liquids was determined. Accuracy and precision of the results will be estimated‚ and attention will be paid to the correct use of the significant figures. The experiment approach that will be used will tell the mass and volume of the metal and
Premium Density Volume Liquid
OLD COINS TURN TO GOLD DESIGN: Problem or Research Question: How does zinc effects the color change in a copper penny? Hypothesis: If copper and zinc comes together‚ then it will form brass‚ which gives gold color to copper penny. Variables: There were no variables at this experiment PROCEDURES: Materials: Zinc (SN) filling‚ 3M NaOH solution‚ Copper penny‚ tongs‚ Hot plate‚ 100 ml beaker‚ 250 ml beaker‚ Bunsen burner‚ Water‚ Spoon. Procedure: First‚ we turned on the hot plate.
Premium Zinc Primary color Copper
Lauren Sullivan Plants Imperfections Abstract The purpose of this experiment was to plant different crosses and observe the different phenotypic ratios the plants present. The procedure of this experiment was plant six different crosses and water them correctly so that we could observe the different phenotypes and compare them to Mendel’s proposed ratios. Mendel‚ who had studied peas‚ did a similar experiment and came up with specific ratios that a monohybrid and dihybrid cross should show. His
Premium Genetics Gregor Mendel Seed
This experiment was performed in order to analyze the effects of pH‚ enzyme concentration‚ and temperature on the catalytic rate on enzyme ALP. The initial experiment was done to approximate the optimum pH for the activity of the enzyme. The hypothesis was that alkaline phosphatase activity will be critically affected by pH effects. The hypothesis was valid because the data shows that the pH values for the acidic‚ basic‚ and neutral tubes increased over time‚ absorbing at similar rates. The basic
Premium Enzyme Chemistry Chemical reaction
Abstract……………………………………………………………………………………………2 Introduction………………………………………………………………………………………..2 Background………………………………………………………………………………..2 Objectives…………………………………………………………………………………2 Scope………………………………………………………………………………………3 Theory review……………………………………………………………………………………..3 Design of report…………………………………………………………………………………...5 Procedures…………………………………………………………………………………………5 Results……………………………………………………………………………………………..6 Discussion…………………………………………………………………………………………6 Conclusion………………………………………………………………………………………...7 Reference………………………………………………………………………………………
Premium Fluid dynamics
of Chemical Engineering CHME 426 –Chemical Engineering Laboratory III Title Page (Full Report) Title of the Experiment: Reaction through three CSTR in series Submitted by: Group (4) Section: Female 1. Name: Amina Ali ID: 200550284 2. Name: Duaa Tabarak ID: 200553858 3. Name: Mariam Rustom ID: 200552242 Date of experiment: 31st March‚ 2010 Date of submission: 11th April‚ 2010 Grades: Report presentation………………………………………… /15 Abstract and Objective(s)……………………………………/10 Introduction
Premium Sodium hydroxide Chemical reaction
References: http://webs.mn.catholic.edu.au/physics/emery/measurement.htm#Measurement http://www.digipac.ca/chemical/sigfigs/experimental_errors.htm http://www.tsb.gc.ca/eng/rapports-reports/rail/2011/r11v0057/r11v0057.pdf
Premium Experiment Science Design of experiments
A. ENG237-02: Transients in RC and RL Circuits 0. Introduction The objective of this experiment is to study the DC transient behaviors of RC and RL circuits. This experiment has divided into 6 parts: 1. Charging curve from measured data ( R = 10M Ω and C = 4 mF ) 2. Draw the charging curve by the graphical method 3. Discharging curve from measured data ( R = 5M Ω and C = 4 mF ) 4. Draw the discharging curve by the graphical method 5. Display of the charging and discharging
Premium Inductor Capacitor RC circuit
By repeating each test for the different colours of light three times‚ it was possible to calculate the mean of the results‚ as well as determine the precision of the results and determine outlying figures. Conducting multiple tests also allows for conclusions regarding the precision and accuracy of the experiment to be made more confidently and easily. Another strong point in the method was lining the boxes containing the samples with aluminium foil to create a reflective
Premium Photosynthesis Light Chlorophyll
CASE WRITE-UPS: “Precision Worldwide‚ Inc.” When a competitor develops and introduces a superior product‚ that is less costly to manufacture and even many times usable and durable‚ Hans Thorborg‚ the general manager of the German plant of Precision Worldwide‚ Inc.(PWI)‚ and his team have to decide to math the competitor’s product. When to do so‚ how to price or what sustainable competitive advantage they need to adopt during the next strategic period‚ given that they hold a large inventory‚ which
Premium Costs Variable cost Contribution margin