SCIENCE TITRATION SIMULATION ! TRIAL 1:! This reaction was strong acid vs. strong base! ! Known: Acid! Unknown: Base HCl NaOH Volume! 25.00 mL 18.66 mL Molarity 0.1396 M Uknown Name! Indicator ! Methyl Orange! Turned red when mixed with the acid solution.! After adding 18.66 mL of base‚ turned orange. After having added the correct amount of base to the acid solution mixed with indicator‚ we can calculate the concentration of the base solution
Premium Acid PH indicator Acetic acid
Type of Fruit Juice / Control | Amount of liquid needed to decolourise DCPIP (cm³) | Control | 0.35 | Apple | 57.8 | Lemon | 3.7 | Pineapple | 1.4 | Fruit Juice | Concentration of Vitamin C (mg/cm³) | Apple | 0.06055 | Lemon | 0.94594 | Pineapple | 1.94444 | Concentration Juice Type Juice Type Amount 3.5/volume of fruit juice = ____mg/cm³ of Vitamin C in the fruit juice. The experiment was reliable as we repeated; the experiment and we cross referenced it with other groups
Premium Titration Vitamin C Laboratory glassware
KATE FITZPATRICK YEAR TWELVE BIOLOGY TERM ONE _(www.happycow.net)_ "TO TEST THE EFFECTS OF ANTACIDS ON PEPSIN’S ABILITY TO DIGEST PROTEIN." _CONTENTS_ 1.0 Abstract Pg 2.0 Introduction · 2.1 Aim · 2.2 Background Information · 2.3 Hypothesis PG · Pg · Pg · pg 3.0 MATERIALS · 3.1 Equipment · 3.2 Chemicals PG · Pg · Pg 4.0 METHOD · 4.1 Variables · 4.2 Procedure PG · Pg · Pg 5.0 RESULTS · 5.1 Sample calculation · 5.2 Tables · 5.3 Graphs · 5.4 Photos PG · Pg · Pg · Pg
Premium Hydrochloric acid PH Gastric acid
Redox Titration Lab ABSTRACT: In this lab‚ 0.010 M purple-colored potassium permanganate solution was standardized by redox titration with iron (II) ammonium sulfate hexahydrate (FAS). The average mass of the three flasks of FAS was 0.483 grams. Once the concentration of the standard solution of KMnO4 (aq) was determined‚ it was used to determine the concentration of Fe2+ in iron pills. On average‚ there was 0.01813 L of solution used. With this information and the balanced net-ionic equation
Premium Titration
Potentiometric Titrations Accuracy The accuracy of a potentiometric analysis is limited by the measurement error for the cell’s potential. Several factors contribute to this measurement error‚ including the contribution to the potential from interfering ions‚ the finite current drawn through the cell while measuring the potential‚ differences in the analyte’s activity coefficient in the sample and standard solutions‚ and liquid junction potentials. Errors in accuracy due to interfering ions
Premium Titration
12.097 Environmental Chemistry of Boston Harbor – IAP 2006 Lab 1: DETERMINATION OF DISSOLVED OXYGEN BY WINKLER TITRATION 1. Background Knowledge of the dissolved oxygen (O2) concentration in seawater is often necessary in environmental and marine science. It may be used by physical oceanographers to study water masses in the ocean. It provides the marine biologist with a means of measuring primary production - particularly in laboratory cultures. For the marine chemist‚ it provides a measure of
Free Titration Iodine
Introduction Background Information To begin a discussion about acid-base titrations‚ we must first recall that there are several definitions of acids and bases. For the purpose of this exercise‚ we will consider the Arrhenius definition of acids and bases‚ in which an acid is a proton (H+) donor and a base produces hydroxide (OH-) in solution. When an acid reacts with a base‚ the products of this reaction are water and a salt. Note that salt here does not only mean table salt (NaCl)‚ but can refer
Free Acid Base Sodium hydroxide
Report: Acid-Base Titration Brianna Morrison Chemistry 111 October 11‚ 2010 Aim: To standardize a solution of the base sodium hydroxide using oxalic acid dihydrate as primary standard acid. Also to determine the amount of sodium hydroxide it takes to titrate a weighted sample of an unknown acid. Procedure: As outlined in instructions provided‚ no changes were made to the procedure. Data: Part A: Trial 1: Amount of H C O 2H O: 0.96 g Buret before titration: 3.6 mL Buret
Premium Sodium hydroxide Base PH indicator
EXPERIMENT 3: INTRODUCTION TO TITRATION – DETERMINATION OF THE MOLARITY AND CONCENTRATION OF SULPHURIC ACID BY TITRATION WITH A STANDARD SOLUTION OF SODIUM HYDROXIDE INTRODUCTION Reaction of acid and base is one of the most common reaction in chemistry. This reaction is also widely known as neutralization. In this experiment‚ we used titration technique which involves accurately measuring the volume of a solution required to react with another reagent. An indicator must be used to determine the
Premium Titration Sodium hydroxide PH indicator
1. Aim: To determine the weight-to-volume percent of acetic acid present in commercial vinegar and the weight-to-volume percent of ammonia present in window cleaners. Acid-base titrations can be conducted using the above samples against standardized aqueous NaOH and standardized aqueous HCl solutions respectively. 2. Introduction: Acetic acid‚ commonly known as ethanoic acid CH3COOH‚ is found in commercial vinegar. It is a weak organic acid that gives vinegar its characteristic pungent smell‚
Premium Acetic acid Titration Acid