Designing the Infrastructure for the Network Lab Report 1. Draw a diagram of the new network. (10 points) 2. Will the current horizontal cabling suffice for the new network? If it will not‚ what type of cable should be used for the horizontal cabling? Provide detailed specifications for this cable. (10 points) I believe that it works with the current cabling‚ but if we wanted the network smoothly‚ I would use a Category 6 network cable. The DHCP‚ or a Dynamic Host Configuration Protocol cable‚
Premium Twisted pair Optical fiber Cable
Unit 4: Definitions Horizontal cabling: The cabling between and including the outlets and the horizontal cross-connect. Backbone cabling: The cabling that connects between telecommunications rooms and equipment rooms. Patch cords: Any flexible piece of cable that connects one network device to the main cable run or to a patch panel. Connectors: A device attached to the end of a cable‚ receiver‚ or light source that joins to another cable or device. Conduit: A rigid or flexible metallic or nonmetallic
Premium Optical fiber Refractive index Electromagnetic radiation
Infrastructure for the Network Lab Report 1. Draw a diagram the new network. (10 points) 2. Will the current horizontal cabling suffice for the new network? If it will not‚ what type of cable should be used for the horizontal cabling? Provide detailed specifications for this cable. (10 points) The current horizontal cable will work with the new network. The only issue with the current cabling is there should be no cables laying on the floor. All cables should be secure and not in any walking paths. This
Premium Twisted pair Coaxial cable
local area network (LAN) connection of the Head Office and each of the remote sites such as but not limited to: a. Cabling design diagram b. Applied network topology c. Applied VLAN implementation and IP network segmentations table d. Network devices in use and its technical specifications such as the no. of ports and speed e. Cables and cabling accessories in use and its specifications f. All other relevant materials and resources 3. Routing table for each routers in tabular form 4. Detailed description
Premium Computer network Internet
Telecommunications Cabling Building Codes Kevin Wingate – NT1310 Introduction • The information in this presentation should be useful in making design-related decisions that will not only satisfy the move to our new building Information Technology (IT) requirements but also meet the needs of the building and its future occupants with respect to voice‚ video and data communications ANSI/EIA/TIA standards • * ANSI/EIA/TIA standards 568-C-Commercial Building Telecommunications Cabling Standard • * ANSI/EIA/TIA
Premium Cable Construction Electrical wiring
Proposal In Data Communication Submitted By: Roel Angelo D. Sobrevilla Mark Anthony V. Baccay Submitted to: Mr. Jonathan Pagurayan Acknowledgement We would like to thanks to Sir Jonathan Pagurayan to have an opportunity to do a proposal in Computer Shop Business in Data Communication. Hope that you understand the work of our group. Introduction The computer shop business nowadays is in demand in all part of our country today because of the modernization of our society. Every time you need
Premium OSI model Ethernet
Exploration Network Fundamentals: Sample Skills Based Final Name: _____________________ Date: __________ Instructor: ___________ Topology Diagram Assessment Objectives • Design the Logical topology. 35 points‚ 20 minutes. • Configure the physical topology. 15 points‚ 5 minutes. • Configure the logical topology. 30 points‚ 20 minutes. • Verify network connectivity. 20 points‚ 15 minutes.
Premium IP address Subnetwork Dynamic Host Configuration Protocol
Like 10BASE-T‚ the active pairs in a standard connection are terminated on pins 1‚ 2‚ 3 and 6. Since a typical category 5 cable contains 4 pairs‚ it can support two 100BASE-TX links with a wiring adaptor. Each network segment can have a maximum cabling distance of 100 metres (328 ft). In its typical configuration‚ 100BASE-TX uses one pair of twisted wires in each direction‚ providing 100 Mbit/s of throughput in each direction (full-duplex). (3) 1000-Mbps or Gigabit Ethernet gigabit Ethernet
Premium Ethernet
NETW410‚ Farooq Afzal 07/28/13 Lab 3: Designing the Infrastructure for the Network 1. Draw a diagram the new network. 2. Will the current horizontal cabling suffice for the new network? If it will not‚ what type of cable should be used for the horizontal cabling? Provide detailed specifications for this cable. In my opinion Cat 6 cable should be used instead the Category 5 CM-rated UTP cable as the horizontal cables that are connected to the patch panel mounted in a relay rack in each
Premium Network topology Cable Ethernet
horizontal cable must be fire retardant‚ the National Electrical Code (NEC) specifications are not as demanding as those governing the use of plenum cable or riser cable. See also NEC‚ plenum‚ plenum cable‚ and riser cable. 2. Backbone Cable : Backbone cabling is the inter-building and intra-building cable connections in structured cabling between entrance facilities‚ equipment rooms and telecommunications closets. Backbone cabling consists of the transmission media‚ main and intermediate cross-connects
Premium Optical fiber Ethernet Cable