Determination of the Concentration of Acetic Acid in Vinegar Lab Exercise 4 CHEM 1106 9/19/12 Purpose: Standardize a sodium hydroxide solution using a primary standard acid. Determine the molarity and the percent by mass of acetic acid in vinegar by titration with the standardized sodium hydroxide solution. Introduction: Vinegar is a dilute solution containing acetic acid. Since vinegar has a low pH‚ it can be titrated with a base. Titration is a method used in order to ascertain
Premium Acid Acetic acid PH
Main aim of experiment 5 is to use the biuret test to quantify the concentration of the Bovine Serum Albumin (BSA) then constructing a standard curve graph and to use the spectrophotometer to perform an enzyme assay using different concentration of the BSA. Experiment 5 also verifies the Beer-Lambert Law‚ which is the linear relationship between absorbance and concentration of an absorbing species. Absorbance formula is shown in fig. 1.1. However‚ the Beer-Lambert Law is not obeyed at high concentration
Premium Chemistry Concentration Spectroscopy
between hydrochloric acid and sodium thiosulphate is affected by the concentration of the acid Simple Procedure Place a conical flask on a piece of paper with a cross on it. Add hydrochloric acid and sodium thiosulphate‚ and record the amount of time taken for the cross to disappear through the solution from the top of the flask. Record this time and repeat this for different concentrations of hydrochloric acid. Fair Test The variables in this test are: The concentration of hydrochloric acid
Premium Chemical reaction Chemistry Concentration
The rate of reaction between sodium thiosulphate and hydrochloric acid Candidate name: Yeo Jin Kim (Kimberly Kim) Candidate number: 000791-021 Teacher: Yitao Duan 1.0 Aim The aim of this experiment is to investigate the changing of concentration effect the rate of reaction between sodium thiosulphate and hydrochloride. 2.1 Chemical Equation 2.0 Raw data 3.2 Qualitative Data 2.1.1 Before the experiment Substance | Color | State | Smell | Hydrochloride (HCl) | Colorless
Premium Chemical reaction Sodium Chemistry
The aim for this investigation is to investigate the effects of varying the concentration of sodium thiosulfate solution on the rate of the reaction when reacting with dilute hydrochloric acid. It is hypothesized that as the concentration of the sodium thiosulfate solution increases‚ the rate of the reaction will also increase proportionately. Variables The independent variable is concentration. This will be varied by increments of 10mL (10mL to 50mL) and distilled water will be added accordingly
Premium Chemical reaction Chemistry Chlorine
Carbonates react with strong acids to give off carbon dioxide and water. Marble is calcium carbonate and thus behaves in the same way: CaCO3 (s) + 2HCL (aq)  CaCL2 (aq) + H2O (l) +CO2 (g) In this experiment‚ I am going to see if temperature affects the reaction rate between marble chips and hydrochloric acid by timing the release of carbon dioxide in the reaction. I predict the higher the temperature‚ the faster the reaction rate. This is due to the kinetic theory. The more heat
Premium Calcium carbonate Carbon dioxide Chemical reaction
Volumetric Determination of Impure Sodium Carbonate (Na2CO3) Introduction: To determine the total amount of carbonate in unrefined sodium carbonate‚ soda ash‚ a titration is done using a standardized solution of HCl. Aqueous HCl is a strong acid and therefore almost completely disassociates into H+ and CL-. Therefore‚ when HCl is used in a titration‚ the H+ is the titrant. Carbonate in aqueous solution is able to accept a proton‚ i.e. it acts as a base. When carbonate accepts the H+ a bicarbonate ion is
Premium Hydrochloric acid Titration PH indicator
Introduction In order to determine the content of calcium and magnesium in an unknown sample of limestone‚ the utilization of atomic absorption spectrophotometry can help in deciphering the unknown concentrations of each molecule in the limestone sample. Atomic absorption spectrophotometry‚ emits radiation of the correct frequency that is passed through a flame and the intensity of the transmitted radiation is measured¹.The calcium concentration or ppm can be measured using the absorbance of the
Premium Analytical chemistry Chemistry Spectroscopy
Soda Ash and Volumetric Analysis of a Carbonate-Bicarbonate Mixture Buti‚ Mary Daphne A. Department of Chemical Engineering‚ Faculty of Engineering University of Santo Tomas España‚ Manila Abstract Sodium carbonate (Na2CO3)‚ commonly known by trade name soda ash‚ is a white‚ anhydrous‚ powdered or granular material that is an essential raw material used in the manufacturing of glass‚ detergents‚ chemicals‚ and other industrial products. In this experiment‚ the percent alkalinity of the unknown
Premium Hydrochloric acid Sodium hydroxide Chlorine
various metals by observing their reaction with hydrochloric acid. Materials: 2 M hydrochloric acid Detergent Test tubes and test tube rack 0.5 pieces of magnesium‚ aluminium‚ iron‚ zinc and cooper Sand paper Ruler Timer Bench mat Method: 1. The surface of the magnesium was cleaned with a piece of sandpaper 2. The Magnesium was placed into a test tube 3. Three Drops of detergent were added to the test tube 4. 2cm of hydrochloric acid was added to the test tube 5. The timer was set
Premium Metal Chemical element Periodic table