lab to observe the various melting points of Naphthalene and Biphenyl when the percentage of composition was altered. A eutectic point of 45 °C at 52% Naphthalene was determined from the class data. An unknown crystalline substance was identified to be Benzophenone by mixing and finding its melting point with known substances. Introduction Organic compounds are categorized by their physical properties and/or chemical reactions. Naphthalene is classified as an aromatic hydrocarbon that
Premium Liquid Temperature Solid
Substance | Structure | M.W. g/mol | Density g/cm^3 | MP (C) | Hazards | Naphthalene | | 128.17 | 1.14 | 80.26 | White crystalline solid‚ with odor | benzophenone | | 182.217 | 1.11 | 47.9 | Barely hazardous‚ don’t get in contact with eyes or skin | Methanol | | 32.04 | 0.79 | -98 | Extremely flammable | Petroleum ether | | 86.18 | 0.77 | -95 | Extremely Flammable | Procedure: 1. 2. Add 80mg of naphthalene to Craig tube. Add few drops of methanol hot solvent. 3. Place tube in
Premium Oxygen Ethanol Chemistry
Freezing Point of Naphthalene I. Purpose To determine the freezing point of a known substance‚ naphthalene II. Materials ringstand gas source test tube test tube clamps thermometer naphthalene Bunsen burner goggles hose stopwatch III. Procedure 1. Assemble the Bunsen burner‚ attaching one end of the hose to the burner and the other to a gas source. 2. Assemble the ring stand so that a ring clamp is attached to the stand holding the test
Premium Temperature Gas Fahrenheit
Nitration of Naphthalene Wed 2/25/2015 Lab report # 1 Abstract: The purpose of this experiment was to nitrate naphthalene with nitronium ion‚ which is formed at low concentration from a reaction of nitric acid and sulfuric acid. The percent yield from the experiment was 54.4% of the product‚ and the melting point of the possible results were 59 °C for 1-nitronaphthalene‚ and 78°C for 2-nitronaphthalene. Introduction: Polynuclear aromatic hydrocarbons such as naphthalene can be nitrated
Premium Nitric acid Chemistry Stoichiometry
Simulation of the Coiling of a polymer strand Tsvetoslav Pavlov Department of Materials‚ Imperial College London‚ United Kingdom 27th Feb 2012 1. Abstract This study will examine the temperature dependence of internal energy‚ heat capacity and R2 value (representative of the end to end distance) using a Langevin Dynamics simulation. It will also consider the dependence of the internal energy‚ heat capacity and R2 value with increasing polymer chain length. Internal energy has been found
Premium Standard deviation Energy
macroeconomics and is used by a broad array of economists‚ from libertarian‚ monetarist supporters of laissez-faire‚ such as Milton Friedman to Post-Keynesian supporters of economic interventionism‚ such as Joan Robinson. Brief history of demand curve and supply curve According to Hamid S. Hosseini‚ the power of supply and demand was understood to some extent by several early Muslim economists‚ such as Ibn Taymiyyah who illustrates- “If desire for goods increases while its availability decreases‚ its price
Premium Supply and demand Economics
solid-liquid phase using cooling curves at various compositions is a method used to obtain the eutectic composition and temperature of naphthalene-biphenyl. The XE was 0.45 and the TE was 310.3K these are slightly different from the theoretical values which are 0.44 and 312K respectively. Results The cooling curves obtained from both groups Group A Group B The table with the mole fraction and the actual masses added. RUN | Group A | Group B | | Naphthalene (g) | Biphenyl added
Premium Phase Melting point Temperature
Experiment 3: Resonance Energy of Naphthalene by Bomb Calorimetry Cameron Fowler CHEM 457: Lab Section 4 Submitted: 11/4/10 Lab Group #3: Michael Hyle Neil Baranik Tim Riley Abstract: The enthalpy of combustion of naphthalene was experimentally determined to be -5030.44 ± 78.98 kJ/mol which was a 2.5% error from the literature value of -5160 ± 20 kJ/mol.2 The theoretical enthalpy of combustion of solid naphthalene was calculated to be -6862.68 kJ/mol using bond energies for the gaseous
Premium Thermodynamics Enthalpy
10 Money Market and the LM Curve MACROECONOMICS Macroeconomics Prof. N. Gregory MankiwRudra SensarmaKozhikode Indian Institute of Management www rudrasensarma info www.rudrasensarma.info ® PowerPoint Slides by Ron Cronovich © 2013 Worth Publishers‚ all rights reserved Learning objectives & outcomes • Money Market & the LM Curve – Real Money‚ Real Income & Interest Rate y‚ – Deriving the LM Curve – Monetary Policy & the LM Curve 2 Financial Markets (Money Market) and the LM
Free Economics Money Money supply
factors that impact the shape of the yield curve but monetary authorities influence greatly the shape of the yield curve .Monetary authorities influence the shape of the yield curve by initiating either a contractionary monetary policy or an expansionary monetary policy.A yield curve is a line that plots the interest rates‚ at a set point in time‚ of bonds having equal credit quality‚ but differing maturity dates. The most frequently reported yield curve compares the three-month‚ two-year‚ five-year
Premium Inflation Monetary policy Interest rate