flows electrical current. In data communication‚ a circuit is considered as a specific path that is between two or more end points that carries along a signal that can be either analog or digital. The physical path of the circuit may consist of one or more wires and can also be wireless as well. The difference between a circuit and a channel is basically the way that it is utilized. A channel is a portion of the circuit that is used to transmit a single voice or data signal‚ which can be either
Premium Integrated Services Digital Network Internet Protocol Data transmission
stream for transmission over a single digital communication channel: Time slots Multiplexer Demultiplexer EE4512 Analog and Digital Communications Chapter 7 • The TDM time slots have to be chosen properly. If the time slots are too small (for example‚ 1 bit) then the multiplexer and demultiplexer must switch rapidly. If the time slots are too large (for example‚ 64 Kb) then the data must be buffered and delay would be produced. TDM is used for baseband (not bandpass) data transmission
Premium Modulation Data transmission
Abstract: VLSI based Accident information and car security system deals with the concern of saving the victim ‚ who get trapped in accident and also about the car security. Accident of the car is detected using pressor sensors which are fixed in car. Accident information to the nearest hospital is carried out with the help of RF communication. The location of the car is found using the GPS technique. The security of car is ensured by using password. The theft information is sent to the owner’s mobile
Premium Global Positioning System Data transmission Serial communication
You should be able to know the terminology and concepts listed below. Introduction to Electronic Communication – Chapters 1–2‚ class notes ● Difference between: ○ Computer network Any telecommunication connection that allows computers to electronically exchange data ○ I nterne t Any set of (inter)connected networks … “inter”-”net” ○ Intranet Network that is not available to the outside world ○ The Internet Global system of interconnected computer networks that uses the TCP/IP protocol suite to link billions of computers worldwide
Premium Modulation Data transmission Internet
Turning data into information © Copyright IBM Corporation 2007 Course materials may not be reproduced in whole or in part without the prior written permission of IBM. 4.0.3 Unit objectives After completing this unit‚ you should be able to: Explain how Business and Data is correlated Discuss the concept of turning data into information Describe the relationships between DW‚ BI‚ and Data Insight Identify the components of a DW architecture Summarize the Insight requirements and goals of
Premium Data warehouse Business intelligence Data management
SPIKES2K6 ANDHRA UNIVERSITY‚VISHAKAPATNAM TITLE “BUS IDENTIFICATION SYSTEM FOR VISION IMPAIRED” AUTHORS V.APARNA VALLI B.V.H.H.SUDHEER B.UMA SANKARA RAO FINAL YEAR E.I.E.DEPT
Premium Radio Data transmission Modulation
Credit value: Communication Technologies F/601/7264 BTEC in Computing 10 Guided learning hours: 60 Aim and purpose The aim of this unit is to ensure learners understand the communication principles of computer networks‚ know the elements of data communications systems and develop the skills to implement network communications. Unit introduction New and developing communication technologies are used within the business world to maximise productivity and access information‚ whether an employee
Premium Computer network Computer networking Internet
spaces such as meeting rooms and auditoriums filled with people and communication is not secure because signals can be intercepted. Technology for solving such problems includes the use of the person body as a signal path for communication. A transmission path is formed automatically when a person comes into contact with a device and communication between mobile terminals begins. Table of Contents 1. RedTacton Technology…………………….………………..3 1.1 Introduction..........
Premium Wireless Data transmission Wireless network
a. Flow control It is the process of managing the rate of data transmission between two nodes to prevent a fast sender from outrunning a slow receiver. It provides a mechanism for the receiver to control the transmission speed‚ so that the receiving node is not overwhelmed with data from transmitting node. Flow control should be distinguished from congestion control‚ which is used for controlling the flow of data when congestion has actually occurred. Error control It is the process of detecting
Premium Data transmission OSI model Ethernet
services‚ the main target of HSDPA is to increase user peak data rates‚ quality of service‚ and to generally improve spectral efficiency for downlink asymmetrical services. HSDPA can achieve theoretical data transmission speeds of 8-10 Mbps(megabits per second). Though any data can be transmitted‚ applications with high data demands such as video and streaming music are the focus of HSDPA. Hence by implementing HSDPA in wifi hotspots theoretical data rates of about 10 Mbps can be achieved even in wifi hotspots
Premium Modulation Data transmission Error detection and correction