ago. My wide spread use over the course of human existence is the very reason that no one knows who discovered me. I belong to the group of elements called the transition metal group. I have several oxidation states and I also have a very high melting point which is around 1337.33 Kelvin. That is very high‚ in Fahrenheit it is 1947.92 degrees and in Celsius it is 1064.18 degrees. I am also paramagnetic‚ which means that I have very weak attractions to magnetic forces and can only be attracted when
Premium Gold
ABSTRACT Determining the melting point of a solid organic compound is the easiest way to identify the compound and determine its purity at the same time. For actual samples of compounds‚ the melting will occur over a range of temperatures making the melting points into a melting “range”. The difference between the temperature at which the sample begins to melt and the temperature at which it finishes melting‚ or the magnitude of the melting range‚ is a very important criteria of determining the
Premium Freezing-point depression Melting point Temperature
with the standard 0.050 M sulphuric acid provided‚ using phenol red indicator until two or three consistent results are obtained. d. Calculate the weight of acetylsalicylic acid in each tablet and compare your results with the manufacturer’s specification. Compare your results with those given in different brands of aspirin. Titration Results Titration trial 1 2 3 Final burette reading (cm3) Initial burette reading (cm3) Volume of acid used (cm3) Average volume
Premium Sodium hydroxide PH indicator Titration
Measuring the Melting Points of Compounds and Mixtures Introduction This exercise dealt with the melting points of pure mandelic acid and benzoic acid. The eutectic temperature and composition of mandelic and benzoic acid mixtures were determined. And finally‚ an unknown was identified by its mixtures and melting point. The melting point of a compound is used by organic chemists not only to identify the compound‚ but also to establish its purity. To determine the melting point two temperatures
Premium Liquid Chemical compound Chemical substance
temperature at which movement of the specimen is observed is recorded as the pour point. INTRODUCTION In the cloud point experiment‚ waxes will appear and thickens the oil and clogs fuel filter and injectors in engines. The wax also accumulates on the cold surfaces and forms an emulsion with water. The appearances of cloud point determine the first cloud of wax crystals in a liquid when it is cooled. Whereas‚ pour point experiment is to determine the minimum temperature of the oil which will continue
Premium Petroleum Temperature
and Purification of Solids Melting Points CH-337 Abstract: The purpose of this experiment was to find the eutectic point for the mixture of naphthalene and biphenyl. This was done by measuring the melting point of both pure substances and five mixtures of different ratios. The purpose of the second section was to identify an unknown sample by measuring its melting point and mixing it with two known substances and comparing them. The results suggest that the eutectic point is closest to the weight
Free Chemical substance Mixture Mix
anesthetic‚ benzocaine‚ was synthesized via the esterification of p-aminobenzoic acid with ethanol. The percent yield of crude product was determined to be 21% and the melting point was recorded at 86.2°C ± 0.2°C‚ with a 6.3% error from 92°C‚ the literature melting point of pure benzocaine. The crude product was then recrystallized to improve the purity of benzocaine and 57.4% was recovered. The new melting point range was measured at 89.1°C ± 0.3°C‚ which has a 3.15% error. The infrared spectrum
Premium Cocaine Local anesthetic
Determination of the Concentration of Acetic Acid in Vinegar Lab Exercise 4 CHEM 1106 9/19/12 Purpose: Standardize a sodium hydroxide solution using a primary standard acid. Determine the molarity and the percent by mass of acetic acid in vinegar by titration with the standardized sodium hydroxide solution. Introduction: Vinegar is a dilute solution containing acetic acid. Since vinegar has a low pH‚ it can be titrated with a base. Titration is a method used in order to ascertain
Premium Acid Acetic acid PH
The Purity and Purification of Solids Melting Point Lab Introduction: The point of this lab was to determine the eutectic point for the naphthalene biphenyl mixture‚ as well as determining the melting point of an unknown substance by comparing it with two known samples. Melting point is a temperature in which a substance changes from solid state to liquid state. Melting points are used to determine whether the given substance is pure or not. Substances that melt sharply‚ less than 1-2°C indicates
Premium Chemical substance Melting point Mixture
Experiment 5 The Quantitative Determination of an Acid in Carbonated Beverages Thomas Canfield Kelly Caddell Chemistry 144B T.A. Brock Marvin 15 October 2012 Methods: Two sodas containing citric acid were investigated in this experiment. Each soda was titrated using one of the two experimental methods. These methods are the traditional titration and the modern titration. Carbonic acid was already removed from the soda by boiling it. Both of the two different titration methods
Premium Titration Sodium hydroxide PH