Lab Report Purpose: 1. To test Mariotte’s Law 2. To test Charles’ law 3. To test Gay-Lussac’s law 4. To test ideal gas law Theory: Mariotte’s law Charles’ law Gay-Lussac’s law Ideal gas law Apparatus: beaker‚ boiling water‚ thermometer‚ pressure-meter‚ oil‚ closed tube. Procedure: 1) Set up all the apparatus 2) Open the rubber cap. Move the closed tube several times to ensure that the oil is spread equally. 3) Pour
Premium Ideal gas law Gas laws Gas
Lab: Gas Laws Purpose: Obtain a reference of temperatures effect on gas using Charles’ law when heating a capillary tube in water on a heated hot plate. Then‚ cooling the same capillary tube with ice while measuring the temperatures cooling effect on the gas bubble inside the capillary tube. Measurements of temperature change are taken with microLAB sensor and graphed using microLAB software. A final determination of experiments determined absolute zero versus actual absolute zero will be
Premium Temperature Gas Celsius
Ideal Gas Law Lab 1. Procedure: First‚ we used a balance to weigh the canister of gas‚ and recorded that mass as the original weight. Then‚ we filled a large bucket with water and recorded the temperature. We then filled a small test tube with water at the same temperature and poured that water into a graduated cylinder to measure the original volume of water in the tube. We then poured the water back into the test tube and placed the tube into the bucket with the opening upwards‚ turning the
Free Gas Pressure Gas laws
Unit 1 Gas Laws Lab Guide PhET Gas Properties lab - http://phet.colorado.edu/en/simulation/gas-properties Your lab write-up for this lab will be a minimum of a 15 slide presentation created with Power point or Libre Office. Contact your instructor if you have questions about your lab assignment. Some information has been provided for you‚ but still needs to be included on your slides. The areas that are bolded are areas of information that need to be completed by you. Submit your lab write-up
Free Gas Temperature Thermodynamics
Gas Laws Lab Introduction: The four basic physical properties of a gas sample are pressure‚ volume‚ temperature‚ and number of moles. The volume simply indicates the volume of the container since a gas will take up all space available to it. The temperature indicates the average kinetic energy of the gas particles. For gases‚ the temperature must be converted to the Kelvin unit. The pressure of the gas indicates the number of collisions with each other and the wall of the container. The number
Premium Gas Pressure Ideal gas law
Introduction: The goal of this experiment was to measure the amount of gas produced in various reactions. The Ideal Gas Law was needed in order to calculate the mass of reactants and moles of gas produced: ‚ where is the pressure in atm‚ is the volume in Liters‚ is the number of moles‚ is the ideal gas constant [0.082 (Latm)/(Kmol)]‚ and is the temperature in Kelvins. Considering the units on R‚ it was important to convert pressure‚ volume‚ and temperature to atm‚ L‚ and K‚ respectively. In
Premium Gas Pressure Ideal gas law
The Ideal Gas Law Lab taught me that hydrogen is lighter than air‚ and can be ignited. The materials used for the experiment include 0.05 grams of magnesium‚ 1M H2SO4‚ water‚ a 100mL graduated cylinder‚ and a beaker. The hydrogen can be ignited with a match. First‚ the beaker is filled with water. The acid is then added to the graduated cylinder‚ with about ¾ inch left at the top‚ which is space for water. Afterward‚ the magnesium is added to the graduated cylinder‚ and it is inverted upside down
Premium
This report will cover the adaptations relating to gas exchange in insects‚ fish and mammals. These all have different gas exchange systems but work in similar ways. All the animals studied have the same characteristics in order for them to be able to work properly. Overview The gas exchange system is the process in which oxygen enters the cells of many living animals. Some factors that affect how efficient a gas exchange system is are things such as the distance that the molecules have to go before
Premium Oxygen Carbon dioxide
S5E1 Gaseous Diffusion 1.0 ABSTRACT In this experiment‚ our objective is to find out the gas diffusion coefficient‚ D of acetone in the air. This experiment is conducted at a temperature of 50ºC and atmospheric pressure. The method that is applied to conduct this experiment is called the Winkleman method where the level of acetone (Z) is determined every 15 minutes by using a microscope. With the level of acetone being determined‚ a graph of t/L+Lo (min /mm) vs. L-Lo (mm) is plotted and the
Premium Oxygen Carbon dioxide Atom
Gas Chromatography Analysis of Product Mixtures Gas Chromatography Guidelines‚ Handout. Introduction Gas chromatography is a technique used to analyze chemical compounds that can be vaporized and separated in a gas phase column. Once separated‚ the analyzed substance is passed through a detector and data is obtained. The samples that we are going to analyze are: the EtOAc from Simple distillation‚ the Fraction 1‚ Fraction 2‚ and Fraction 3 from the Fractional Distillation. Experimental Procedure
Premium Chromatography Gas chromatography Analytical chemistry