Calorimetry: Enthalpy of Neutralization Introduction: The purpose of this lab experiment was to determine the molar concentration of the unknown HCl by using a coffee cup calorimeter. A coffee cup calorimeter is made of Styrofoam cups with a thermometer that is placed from the top and into the calorimeter to measure the temperature as the reaction happens. The Styrofoam cup used for the calorimeter creates an isolated system as it acts as a heat insulator between the cup and the surrounding
Premium Thermodynamics Electrolyte Heat
Determining the enthalpy of neutralization by calorimetry Anam Iqbal Partner’s name: Danielle Hodgson TA’s name: Karinna Section # 003 Due date: November 24‚ 2009 Introduction The purpose of the experiment is to determine the enthalpy of neutralization reactions by calorimetry. Calorimetry‚ is the science of measuring the amount of heat. All calorimetric techniques are therefore based on the measurement of heat that may be generated (exothermic process) or consumed (endothermic process). The
Premium Thermodynamics Enthalpy Sodium hydroxide
Abstract This lab is performed in order to determine the total energy in a reaction between zinc and hydrochloric acid. The reaction is done twice‚ once to measure the heat of the reaction and again to determine the work done in the system. This is because Enthalpy equals heat plus work (∆H= ∆E+W). Heat and work can be broken down further into separate components so the equation used in lab is ∆H=mc∆T + PV. Many calculations are used in the lab to find out what cannot be measured directly (ex:
Premium Thermodynamics Energy Temperature
Enthalpy‚ represented by the sign ∆H in kJ/mol‚ is the heat change in a reaction. It shows whether how much heat is released or absorbed during the reaction. If the reaction is endothermic‚ the enthalpy would be positive and if the reaction is exothermic‚ the enthalpy would be negative. During a chemical reaction‚ which consists of breaking and creating bonds‚ heat is either absorbed or released. In this lab‚ the reaction uses the disassociation of an ionic compound ammonium nitrate shown in the
Premium Entropy Thermodynamics Temperature
Experiment B2‚ Heats of Combustion – The Bomb Calorimeter. Objectives: To calibrate a bomb calorimeter by the combustion of benzoic acid. Then to use the calibrated calorimeter to measure the heat of combustion of naphthalene and calculate the heat of formation of naphthalene. Theory: q = C.ΔTBA C = q / ΔTBA Moles = mass / Mr ΔŪ = ΔU / moles ΔHoc‚298 = ΔŪoc‚298 + PDV = ΔŪoc‚298 + RTΔn C10H8 (s) + 12O2 (g) 10CO2 (g) + 4H2O (l) ΔHoc‚298 = - 1
Premium Thermodynamics Heat Temperature
(Fig-1)- Parr 6300 Bomb Calorimeter to calculate Gross Calorific value • A very programmed calorimeter to free the client from the manual operations required for normal calorimeters and minimize administrator time required per test. • A fast calorimeter fit for performing up to 8 tests in 60 minutes. • A high accuracy calorimeter fit for surpassing the repeatability and reproducibility necessities of all global standard test strategies. A full high lighted calorimeter equipped for stand alone
Premium Washing
Bomb Calorimeter What is a Bomb Calorimeter? In calorimetry‚ a bomb calorimeter is a piece of equipment used to measure the heat fluctuation of a reaction’s system‚ the changes in physical properties and the thermal capacity. How does a Bomb Calorimeter works? A calorimeter is basically used for measuring the heat of fuels as it burns at a specific temperature in order to obtain the heat energy values. The samples of fuel used can either be solid or liquid but not gas. The calorimeters is estimated
Premium Nuclear fission Chemistry Temperature
The Enthalpy of Formation of Magnesium Carbonate By: Jessica Miller T.A: Thomas Lab Partner: Rebekah Melanson Thursday Lab Room 106 Chemistry 1001-A Due Date: Thursday February 3rd 2011 Abstract The purpose of this experiment was to determine the enthalpy of formation of magnesium carbonate in a lab setting. This was done using a calorimeter‚ which was calibrated by adding a known amount of both hot and cold water. Following the calibration of the calorimeter‚ HCl was placed into the empty calorimeter
Premium Enthalpy Thermodynamics
SPECTROPHOTOMETRIC DETERMINATION OF EQUILIBRIUM CONSTANT OF A REACTION UNIVERSITY OF THE PHILIPPINES‚ DILIMAN QUEZON CITY‚ PHILIPPINES August 2‚ 2013 ABSTRACT The objective of this experiment is to determine the equilibrium constant‚ denoted Keq‚ for the formation of [Fe(SCN)]2+ complex which is a product of the reaction between the ions Fe3+ and SCN-. In performing this experiment‚ solutions containing FeCl3 and KSCN‚ diluted in HCl‚ were measured for their absorbance using a UV-Vis
Premium Concentration Chemical reaction Chemical equilibrium
enzyme involves monitoring the change in absorbance of the reaction medium at 405 nm. Exergonic (i.e energy producing reactions) exhibit a negative free energy change. Sometimes these reactions occur spontaneously‚ but generally some energy must be supplied to initiate the reaction; in other word an energy barrier exists between the reactants and the products. The “energy barrier” represents the activation energy of a chemical reaction. In this practical the activation energy of hydrolysis
Premium Chemical reaction Enzyme Chemistry