ColleGe Chemistry LabPaq / Published by: Hands-On Labs‚ Inc. sales@HOLscience.com / www.HOLscience.com / Toll Free 866.206.0773 a laboratory manual of small-scale experiments for the independent study of General College Chemistry 50-0125-CK-01 LabPaq® is a registered trademark of Hands-On Labs‚ Inc. (HOL). The LabPaq referenced in this manual is produced by Hands-On Labs‚ Inc. which holds and reserves all copyrights on experiences. The laboratory manual included with a LabPaq is intended for
Premium Sodium chloride Volume Laboratory
Department of Chemistry Physical and Chemical Properties Submitted by: Date Submitted: 2/2/2014 Date Performed: 1 Lab Section: Course Instructor: PURPOSE: To identify chemical and physical change in matter. PROCEDURE: Finding out the physical and chemical change in matter. There was seven different substances that were being tested; Mossy Zinc (Zn)‚ Magnesium (Mn)‚ Copper (Cu)‚ Magnesium Oxide (MgO)‚ Copper II Nitrate (Cu(NO3)2)‚ Copper II Carbonate (CuCO3) and Sodium Chloride
Premium Chemistry Chemical reaction Sodium chloride
during the procedure. It was possible to distinguish between physical and chemical changes using scientific observations. Experiment and Observation Please note that this procedure was adapted from the “Observation of Chemical and Physical Changes” LabPaq Lab manual (Hands-On Labs Version 42-01-82-00-03‚ 2015) Table 1 Well Chemical #1 (4 drops) Chemical #2 (4 drops) Observations: Chemical Change (Y/N) A1 NaHCO3 (Sodium Bicarbonate) HCl (Hydrochloric Acid) Bubbles‚ no change in color‚ clear‚ Y A2 NaOCl
Premium Chemistry Chemical reaction Experiment
PR OCEDURE Before beginning‚ set up a data table similar to the Data Table: Experiment Results in the Lab Report Assistant section. This experiment will create a reaction of sodium carbonate and calcium chloride dihydrate to produce a precipitate of calcium carbonate. This formula is: Na2CO3(aq) + CaCl2. 2H2O(aq) à CaCO3(s) + 2NaCl(aq) + 2H2O 1. Put on your goggles. 2. Weigh out 1.0 g of CaCl2·2H2O and put it into the 100-mL beaker. Add 25 mL of distilled water and stir to form the calcium
Premium Stoichiometry Sodium chloride Calcium
EXPERIMENT II: SEPERATION OF A MIXTURE OF SOLIDS PURPOSE: The purpose of this experiment was for me to become familiar with the separation of mixtures and solids and to learn separation techniques based on the chemical properties of a substance. PROCEDURE: Before beginning‚ I set up a data table to record data from the experiment. 1. Separating out the Iron a) I used my digital scale to determine the mass of my weighing dish. b) I emptied the entire mixture of solids from the plastic bag into the weighing
Premium Water Sodium chloride Salt
Biology LabPaq / Published by: Hands-On Labs‚ Inc. sales@HOLscience.com / www.HOLscience.com / Toll Free 866.206.0773 A laboratory Manual of Small-Scale Experiments for the independent Study of general Biology 50-0053-BK-02 LabPaq® is a registered trademark of Hands-On Labs‚ Inc. (HOL). The LabPaq referenced in this manual is produced by Hands-On Labs‚ Inc. which holds and reserves all copyrights on experiences. The laboratory manual included with a LabPaq is intended for the sole use
Premium Cell membrane Bacteria Drinking water
temperature‚ presence of a flame‚ and evolution of light‚ as when as firefly glows. Three physical changes that indicate a chemical change may have occurred (and that may be seen in this lab) are: 1. Color changes 2. Precipitate (formation of a solid) 3. Formation of gas bubbles Procedure: (1 of 20 points) No preliminary dilution of my test chemicals were necessary as Lab Paq provided pre-diluted chemicals. Utilizing the 96-well plate‚ 2 pipet drops of each chemical were added to the wells in
Premium Chemical reaction Chemistry
| |1 |Spoon | |LabPaq provides | |1 |Cheesecloth 5”x10" | | | |1 |Detergent‚ Liquid‚ 15 mL in a dropper
Premium DNA
textbooks and the LabPaq box or 5-6 thick textbooks. 2. Remove the plunger from the titrator and place it back in your LabPaq box. 3. Attach the stopcock to the tip of the titrator by placing the larger‚ clear‚ plastic end of the stopcock into the tip of the titrator and then twisting the stopcock into place. The stopcock should fit tightly into the titrator‚ so that the liquid will not leak. 4. Stack the textbooks on top of one another or stack two textbooks on top of the LabPaq box. 5. Clamp
Premium Water Water supply Towel
MBK Lab 01 – Lab Report Name: ____________________ Section: ___________________ EXPERIMENT 1 TITLE: Observing Bacteria and Blood OBJECTIVE: To gain functional knowledge of microscope operations through practical applications of a microscope in the observation of bacteria and blood. PROCEDURES: Using the microscope‚ an oil immersion lens and observing Bacteria Cultures in Yogurt . Preparing a Blood Slide and observing Blood: After reviewing the section of the manual
Premium Agar plate Bacteria Growth medium