people. They see should all look at the chemical and physical appearance. My claim is the the mystery mixture was Citric acid‚ road salt‚ and baking soda. The reason I thought it was this mixture because of the physical and chemical appearance. I agree with baking soda road salt and citric acid.The baking soda gives the mixture a powdery texture.The road salt are the little pebbles in the mixture. The citric acid is what make the road salt get smaller. The reason i don’t think it was anything else
Premium Water Chemistry Chemical reaction
Lab 2: Separation of Mixtures and Solids Purpose: The purpose of this lab is to become familiar with the separations of mixtures and solids. Pre-lab predictions: Data: Data Table 1: Experiment Data | | Grams | Percentage of Mixture | Iron Filings | 2.0g | 26.67% | Sand | 1.6g | 21.33% | Table Salt | 2.4g | 32.00% | Benzoic Acid | 1.2g | 16.00% | Total | 7.5g | 96% | Observations: While the water was boiling with the three solids (salt‚ benzoic acid‚ and sand) the water got
Premium Water
Introduction A heterogeneous mixture is not uniform throughout. Therefore‚ separate components of a heterogeneous mixture can be separated by using differences in the components’ physical properties. In this laboratory experiment‚ I attempted to experimentally verify that the components of a heterogeneous mixture containing salt‚ sand‚ and benzoic acid can be separated using the separate components’ solubility properties (ability to dissolve in water). Because it is known that organic compounds
Premium Solvent
Components of a Mixture January 9‚ 2013 Hailey Rounds Partners: Kelsy Shay Katie Nelson Objectives: The purposes of this experiment are to separate two components in a mixture‚ specifically sodium chloride and silica‚ and find the correlating percent composition of each. Abstract: This experiment consisted of the separation of sodium chloride and silica. The mixture was separated by extracting the sodium chloride with water and drying both substances. Adding water to the mixture‚ stirring‚ then
Premium Water Sodium chloride Evaporation
Ocean county college | SEPERATION OF A MIXTURE OF SOLIDS | DEPARTMENT OF CHEMISTRY | | John Curran | 2/23/2013 | COURSE INSTRUCTOR DR. NANCY MARASHI. | Background: During this experiment students will take a mixture and separate it into its’ pure substances. A mixture is a combination of two or more substance. These substances cannot be combined chemically but more physically. The pure substances are substances that cannot be separated any more by physical means. The students
Premium Water
LS Separation of Mixtures and Solids Purpose: To become familiar with the separation of mixtures of solids Hypothesis: I will be able to separate the materials using a variety of different methods. First‚ separate the iron fillings using a magnet. Second‚ I will put the rest of the solution into water and separate the insoluble sand from the soluble salt and benzoic acid. Third‚ I will filter out the benzoic acid when crystalized. Lastly‚ I will evaporate the water away leaving crystallized
Premium Water Sodium chloride
experiment introduces magnetism‚ evaporation and filtration as ways to separate mixtures. Temperature when soluble Sand N/A Iron N/A Sodium Chloride 400F Benzoic Acid 100F Experiment and Observation After gathering all the material needed to conduct these experiments‚ the first experiment was initiated. The mixture of solids was weighed out as well as the 10cm square piece of paper and the weighing dish. The mixture was spread out in a very thin layer on a piece of paper‚ the magnet was
Premium Water Salt Filter paper
Separation of a Mixture of Solids I really enjoyed this lab. After reading the introduction I started by making my own flow sheet of how I thought this lab would work. I was reminded about solubility which is defined as the amount of the solute that will dissolve in a given amount of solvent and that the extent to which a substance dissolves depends mainly upon the physical properties of the solvent and of the solute and to some extent upon the solvent’s temperature. With that being said I came
Premium Solubility Oxygen Solvent
Lab #2 – Separation of a Mixture of Solids Abstract The mixed solution contained benzoic acid‚ iron‚ table salt‚ and sand. When separated using water‚ fuel‚ or a magnet‚ their characteristics and properties changed. The mass of the entire mixed solids was 6.6 grams. When the magnet was used‚ the iron was immediately picked up. The mass for that was 1.7 grams. The table salt was 1.2 grams. Benzoic acid mass was 0.8 grams and the sand was 1.4 grams after being separated. Introduction The objective
Premium Water
Introduction Atoms‚ molecules‚ compounds and mixtures‚ although they may not seem it‚ are different. Atoms make up all of the above and elements. They are made an equal amount of protons and electrons. Molecules are made when two or more atoms connect chemically. Like molecules‚ compounds are made when two or more atoms connect chemically. Unlike molecules‚ the atoms need to be two or more different elements. Mixtures are made of two or more compounds or elements. Mixtures can look completely the same when
Premium Cake Chemistry Baking