09/18/2012 09/19/2012 Title: Separation of Mixtures and Solids Purpose: The purpose of this experiment was to practice the process of separating mixtures of different solids. Procedure: This experiment consisted of different processes to separate a mixture of solids into the four individual solids: sand‚ benzoic acid‚ iron fillings‚ and sodium chloride. To remove the iron fillings from the mixture I used a magnet and scanned it across the entire mixture and the magnet forced picked up
Premium Separation process Evaporation Mixture
LAB 4 – SEPARATION OF A MIXTURE OF SOLIDS Purpose: To determine and execute the separation of mixture of solids through different means. Examples are magnetisms‚ evaporation‚ and filtration. Observations and Experimental Data: Data Table 1: Experiment Data Grams Percent of mixture Iron filings 1.4 g 31.1 % Sand 1.3g 28.9 % Table salt 1.0g 22.2% Benzoic acid .8g 17.8 % Total 4.5g 100% Questions: A. How did your proposed procedures or flow charts
Premium Mixture Water Separation process
Separations of the Components of a Mixture January 9‚ 2013 Hailey Rounds Partners: Kelsy Shay Katie Nelson Objectives: The purposes of this experiment are to separate two components in a mixture‚ specifically sodium chloride and silica‚ and find the correlating percent composition of each. Abstract: This experiment consisted of the separation of sodium chloride and silica. The mixture was separated by extracting the sodium chloride with water and drying both substances. Adding water to
Premium Water Sodium chloride Evaporation
Lab #2 – Separation of a Mixture of Solids Abstract The mixed solution contained benzoic acid‚ iron‚ table salt‚ and sand. When separated using water‚ fuel‚ or a magnet‚ their characteristics and properties changed. The mass of the entire mixed solids was 6.6 grams. When the magnet was used‚ the iron was immediately picked up. The mass for that was 1.7 grams. The table salt was 1.2 grams. Benzoic acid mass was 0.8 grams and the sand was 1.4 grams after being separated. Introduction The objective
Premium Water
LS Separation of Mixtures and Solids Purpose: To become familiar with the separation of mixtures of solids Hypothesis: I will be able to separate the materials using a variety of different methods. First‚ separate the iron fillings using a magnet. Second‚ I will put the rest of the solution into water and separate the insoluble sand from the soluble salt and benzoic acid. Third‚ I will filter out the benzoic acid when crystalized. Lastly‚ I will evaporate the water away leaving crystallized
Premium Water Sodium chloride
Separation of a Mixture of Solids I really enjoyed this lab. After reading the introduction I started by making my own flow sheet of how I thought this lab would work. I was reminded about solubility which is defined as the amount of the solute that will dissolve in a given amount of solvent and that the extent to which a substance dissolves depends mainly upon the physical properties of the solvent and of the solute and to some extent upon the solvent’s temperature. With that being said I came
Premium Solubility Oxygen Solvent
Ocean county college | SEPERATION OF A MIXTURE OF SOLIDS | DEPARTMENT OF CHEMISTRY | | John Curran | 2/23/2013 | COURSE INSTRUCTOR DR. NANCY MARASHI. | Background: During this experiment students will take a mixture and separate it into its’ pure substances. A mixture is a combination of two or more substance. These substances cannot be combined chemically but more physically. The pure substances are substances that cannot be separated any more by physical means. The students
Premium Water
experiment introduces magnetism‚ evaporation and filtration as ways to separate mixtures. Temperature when soluble Sand N/A Iron N/A Sodium Chloride 400F Benzoic Acid 100F Experiment and Observation After gathering all the material needed to conduct these experiments‚ the first experiment was initiated. The mixture of solids was weighed out as well as the 10cm square piece of paper and the weighing dish. The mixture was spread out in a very thin layer on a piece of paper‚ the magnet was
Premium Water Salt Filter paper
each component in a mixture containing sand‚ salt and iron filings. Introduction: Many substances that we use on a daily basis are in fact part of a mixture. A scientist separated a mixture to obtain the specific substance that was in need. Many of the compounds and mixtures today are not found in its pure form‚ but in mixtures. Many scientists have the impression that separating mixtures is an important part of chemistry and modern academics. How can the components of mixture be separated and analyzed
Premium Chemistry Mixture Water
Experiment 3Quantitative Separation of Mixtures This experiment performs the quantitative separation of thecomponents of a mixture. A mixture is the mixing of two or more substancestogether. The proportions of the components in the mixture can be varied.And the resulting mixture can be either homogeneous or heterogeneous‚depending on the properties of components such as solubility.In this experiment‚ you are going to separate a water-solublecomponent from water-insoluble components
Premium Separation process Distillation Mixture