all subject to error which leads to the uncertainty of the result. Errors may come from systematic errors (deterministic error) or random error (not deterministic error). In this experiment‚ the group measured the diameter of sphere using different kinds of measuring devices (foot rule‚ vernier caliper‚ and micrometer caliper) in order to achieve accuracy in the scientific measurements. After experimenting‚ it was revealed that the micrometer caliper has the lowest percentage of error. 1. Introduction
Premium Measurement
References: http://www.scribd.com/doc/94383213/Physics-Lab-Report Physics reference book ;pearson;James S.Walker http://www.digipac.ca/chemical/sigfigs/experimental_errors.htm
Premium Newton's laws of motion Mass Classical mechanics
Interpretations: 1. The time required for the objects with different masses to fall equal distances was equal. 2. The average speed of the two different masses was quite similar‚ within one tenth of a second of each other. 3. Yes‚ because physics theory says that objects free falling‚ where the only force acting on them is gravity‚ accelerate at the same rate no matter what their mass is. 4. The change in spacing of the dots tells us that the speed of the object is increased as it falls
Premium Mass Acceleration
Collision Impulse and Momentum PH215L Physics 1 Lab Lab#8 Lab Was Held: 3/20/14 Report Submit: 3/27/14 Professor List Daniel Webster College Table Of Contents Introduction Theoretical background Equipment list Procedure Calculations and Results Discussion Conclusion Introduction In this lab we tested the duration of impact‚ the force of impact and the change of momentum of the particles involved in the collision all
Premium Classical mechanics Force Object-oriented programming
Measuring Time Date Due: 2013.09.23____ Name: Lily Li____ Class: A__ Teacher: ___Mrs Slater___ Purpose: To determine the period and the frequency of a ticker timer. Materials/Apparatus: One ticker timer One carbon paper disc One 1.5+ meter tape One test tape One stop-watch Theory: The recording timer is a device that helps you study motion‚ it is a simple electric device plugged
Premium Time Frequency Error
Experiment 1: Simple Harmonic Motion Dominic Stone Lab Partner: Andrew Lugliani January 9‚ 2012 Physics 132 Lab Section 13 Theory For this experiment we investigated and learned about simple harmonic motion. To do this we hung and measured different masses on a spring-mass system to calculate the force constant k. Simple harmonic motion is a special type of periodic motion. It is best described as an oscillation motion that causes an object to move back-and-forth in response to
Premium Mass Force Classical mechanics
REPORT FOR EXPERIMENT 1 MEASUREMENT Group 5 Name: Tien Pham PHYS 2125 Class number 35818 Day: 1/14/1013 Instructor: Dilipkumar Mehta OBJECTIVES The purpose of the experiment is to determine the diameters and
Free Measurement Volume Orders of magnitude
The Relationship Involving Acceleration‚ Net Force‚ and Mass Giho Park Purpose The purpose of this lab investigation is to observe the relationship among the net force‚ mass‚ and acceleration of an object. Hypothesis/Prediction Part A If the net force increases with a constant mass‚ then the acceleration would increase‚ because the force would push the object to increase the velocity. Part B If the mass of the cart increases with a constant net force‚ then the acceleration would
Premium Force Newton's laws of motion Mass
Experiment 9: THE TANGENT GALVANOMETER; PURPOSE: In this experiment we will measure the magnitude of the horizontal component of the Earth’s Magnetic field by the use of an instrument called a tangent galvanometer. INTRODUCTION: A tangent galvanometer consists of a number of turns of copper wire wound on a hoop. At the center of the hoop a compass is mounted. When a direct current flows through the wires‚ a magnetic field is induced in the space surrounding the loops of
Premium Refraction Snell's law Refractive index
OF EXPERIMENT The purpose of this lab was to determine the magnitude of the uncertainties produced when making measurements using common lab equipment. II.APPARATUS AND MATERIALS NEEDED safety goggles distilled water (at 20°C) laboratory apron dropper laboratory balance 2 objects of unknown mass standard masses graduated cylinder‚ 10-mL graduated cylinder‚ 100-mL III.PROCEDURE Part A: Estimating the Uncertainty of a Balance 1.We put on lab aprons and goggles. Then‚ we used the
Premium Mass Measurement Uncertainty