REPORT FOR EXPERIMENT 1 MEASUREMENT Group 5 Name: Tien Pham PHYS 2125 Class number 35818 Day: 1/14/1013 Instructor: Dilipkumar Mehta OBJECTIVES The purpose of the experiment is to determine the diameters and
Free Measurement Volume Orders of magnitude
INTRODUCTION Surface modification is a miraculous application of Electric Discharge Machining (EDM). It can modify the conductive material surface by both removing material from the surface and depositing material on the surface. It can remove or deposit material from the work surface through controlled electrical sparks by the process of melting and evaporation. The controlled sparks erode material from the work and tool surface within very short intervals of time. Study of surface morphology widens
Premium Electricity Electromagnetism Electric charge
Field Note 117: field radius growth is definitely not linear for linear control voltage increase. Ben sat back from the work bench and took several calming breaths. His sandwich sat on the test plate on top of the field projector array. It was a turkey club...the sandwich that is. The test plate was just a paper plate and the field projector array looked like a vintage ham radio and a movie projector had gotten very intimate. He couldn’t deny the results though. Little fella might have a touchy
Premium Magnetic field Standard deviation Arithmetic mean
THE RELATIONSHIP OF ELECTRIC FIELD INTENSITY AND ITS DISTANCE FROM THE CHARGED OPOINT PHYS-232 JIANSONG HE GROUP: Abstract This experiment was performed to find the electric field strength from different distance to the charged point. The field strength was determined statically‚ by measuring its electrical potential when subjected to loading‚ and dynamically‚ by measuring the electrical potential at different location on the conductive paper. The electrical potential was measured from three
Premium Electric charge Electromagnetism Magnetic field
variable represents the length of the string and the dependent variable represents the period of one oscillation. The control variable is the mass of the pendulum. In this lab our goal was to see if we can prove if the acceleration due to gravity is 9.8m/s2. The R2 in this lab is closed to 9.8 m/s2 . The formula that we used in this lab is T=2πLg and then we solved for g=L(T2π)2. HYPOTHESIS: The gravity will be 9.81 m/s2 at sea level due to the acceleration. PROCEDURE: Materials: stopwatch‚ meter
Premium Pendulum Mass Galileo Galilei
Lab #1: Projectile Motion Purpose: To determine experimentally the initial and final velocities of an air powered projectile. Hypothesis: If the angle of the rocket is launched at 45 degrees than the distance and velocity will maximize. Materials: Rocket launching platform Rocket launcher Rocket body Air pump Safety goggles Rubber washer Nose cone 40‚ 45‚ 50‚ 55 and 60 angle wooden blocks Measuring wheel Procedure: 1. The rocket was assembled by the rocket launcher
Premium Rocket Hypothesis
Patel Nil Period 7 05/09/13 Static and Kinetic Friction Objectives:- * Use a Dual-Range Force Sensor to measure the force of static friction. * Determine the relationship between force of static friction and the weight of an object. * Measure the coefficients of static and kinetic friction for a particular block and track. * Use a Motion Detector to independently measure the coefficient of kinetic friction and compare it to the previously measured value. * Determine if the
Premium Friction Force Classical mechanics
The Relationship Involving Acceleration‚ Net Force‚ and Mass Giho Park Purpose The purpose of this lab investigation is to observe the relationship among the net force‚ mass‚ and acceleration of an object. Hypothesis/Prediction Part A If the net force increases with a constant mass‚ then the acceleration would increase‚ because the force would push the object to increase the velocity. Part B If the mass of the cart increases with a constant net force‚ then the acceleration would
Premium Force Newton's laws of motion Mass
| Buoyant ForceB=Δmg=ρf VobjgThis equation was used to calculate the buoyant force of an object. | Experimental Procedure: ProcedureA: * Setup similar to the spring constant lab * Use the same or a similar spring from the spring constant lab * Find the spring constant of the smallest spring used from previous lab if not already foundB: * Use the same metal rod from the Error of Propagation experiment and attach it to the bottom of the spring * Fully submerged the metal rod in a beaker
Premium Management Marketing Mass
Aim: To find the mass in grams (m) of a paperclip. Apparatus: Procedure: 1. Using a piece of string‚ the external circumference(C) of the small test tube was found and was then used to find A ‚ the cross sectional area of the small test tube A=C24π . 2. The beaker was placed under the test tube after it was clamped on the retort stand to collect excess water. The large test tube was filled with water. After which‚ the small test tube which had a fitted scale was placed inside to float
Premium