Ocean County College Department of Chemistry Liquids and Solids Date Submitted: June 21‚ 2015 Date Performed: June 19‚ 2015 Lab Section: Chem-181DL1 Course Instructor: Prof. Amal Bassa Purpose The purpose of this experiment was to determine the boiling point of isopropyl alcohol and determine the melting point of acetamide. Procedure To begin I tied the test tube and thermometer together and inserted an inverted closed-end capillary tube into the test tube. I then
Premium Liquid Temperature Solid
Laboratory #16: Analysis of Grease in Water by Solvent Extraction Experiment Date: 2/19/10 Due Date: 2/26/10 II. Objective The goal of this lab was to determine the amount of impurity‚ in the form of oil‚ in water using the method of solvent extraction‚ also known as liquid-liquid extraction‚ a method of separating two materials with different physical and/or chemical properties. Two methods of evaporation will be used to finally determine the concentration of impurity- one using an explosion-proof
Premium Water Distillation Solvent
the gasses react under certain conditions. These conditions‚ such as introducing a flame to the gas as well as oxygen and CO2‚ caused other reactions to occur. Experiment Before I began the experiment I gathered all my supplies from the given list in the lab manual. From there I began the actual experiment and diluted the HCL placed in a test tube and then placed the ZN in the tube as well. I placed the stopper and gas delivery plastic system on the test tube and arranged the tube in the well
Premium Oxygen Gas Carbon dioxide
Separating Acids and Neutral Compounds by Solvent Extraction Introduction The purpose of this experiment was to use solvent extraction techniques in order to separate a mixture consisting of a carboxylic acid (p-toulic acid)‚ a phenol (p-tert-butylphenol)‚ and a neutral compound (acetanilide). Extraction is the process of selectively dissolving one or more of the compounds of a mixture into an appropriate solvent‚ the solution that contains these dissolved compounds is called an extract (Manion
Premium Chemistry Solubility Solvent
Experiment 2: Separation of a Mixture of Solids Purpose: This experiment allowed me to learn different separation techniques for various substances based on their specific chemical properties. Procedure: I began this experiment by using a magnet to pick up and collect the iron filings out of the mixture. Then the sand was separated by placing the mixture into a beaker and boiling it in distilled water in order to dissolve the salt and benzoic acid‚ once boiling the liquid was poured out leaving
Premium Water Distillation
many materials we use today are actually mixtures of pure substances. The separation of these materials into their pure substances can be quite challenging. When we are discussing separations of a mixture that contains pure substances‚ it all depends on whether you can separate the substances by physical means. That means‚ utilizing each substances physical properties such as boiling point‚ melting point‚ and magnetism. Separation of a Mixture of Solids Lab Report Assistant
Premium Water Sodium Sodium chloride
2013 Separation of a Mixture of Solids Step 1: Separating out the Iron Mass of weighing dish: 0.7g Mass of weighing dish and mixture: 5.4g Net mass of the original mixture: 4.7g Mass of 10-cm square paper: 0.8g Mass of 10-cm square paper and iron fillings: 2.0g Net mass of iron filings: 1.2g Step 2: Separating out the Sand Mass of weighing dish: 0.7g Mass of weighing dish and dry sand: 1.7g Net mass of the dry sand: 1.0g Step 3: Separating out the Benzoic acid Mass
Premium Salt Chlorine Sodium chloride
with the separation of mixtures of solid and learn separation techniques based on the chemical properties of a substance. PROCEDURES 1. Separating out the Iron a. Use your digital scale to determine the mass of your weighing dish. b. Empty the entire mixture of solids from the plastic bag into the weighing dish and determine the gross mass of the total mixture and weighing dish. Compute the net mass of the mixture: this is equal to the gross mass of the weighing dish with the mixture less the
Premium Water Sodium chloride Salt
Lab 3 – Separation of a Mixture of Solids Cathy Lab Partners: Chelsea Brooke Sept 4‚ 2012 Chemistry 131A Dr. Vicki H Audia Pelab Questions: Proposed procedure for separation of a mixture: Use physical properties of the 4 substances to separate. 1. Remove iron with magnet 2. Add water to the mixture to melt the benzoic acid and NaCl then filter out sand. 3. Chill the solution and scoop the acid out leaving a salt solution. 4. Boil water away leaving salt. Purpose: The
Premium Chemistry Psychology Sociology
Lab 2: Separation of Mixtures and Solids Purpose: The purpose of this lab is to become familiar with the separations of mixtures and solids. Pre-lab predictions: Data: Data Table 1: Experiment Data | | Grams | Percentage of Mixture | Iron Filings | 2.0g | 26.67% | Sand | 1.6g | 21.33% | Table Salt | 2.4g | 32.00% | Benzoic Acid | 1.2g | 16.00% | Total | 7.5g | 96% | Observations: While the water was boiling with the three solids (salt‚ benzoic acid‚ and sand) the water got
Premium Water