materials we use today are actually mixtures of pure substances. The separation of these materials into their pure substances can be quite challenging. When we are discussing separations of a mixture that contains pure substances‚ it all depends on whether you can separate the substances by physical means. That means‚ utilizing each substances physical properties such as boiling point‚ melting point‚ and magnetism. Separation of a Mixture of Solids Lab Report Assistant
Premium Water Sodium Sodium chloride
2013 Separation of a Mixture of Solids Step 1: Separating out the Iron Mass of weighing dish: 0.7g Mass of weighing dish and mixture: 5.4g Net mass of the original mixture: 4.7g Mass of 10-cm square paper: 0.8g Mass of 10-cm square paper and iron fillings: 2.0g Net mass of iron filings: 1.2g Step 2: Separating out the Sand Mass of weighing dish: 0.7g Mass of weighing dish and dry sand: 1.7g Net mass of the dry sand: 1.0g Step 3: Separating out the Benzoic acid Mass
Premium Salt Chlorine Sodium chloride
Lab #2 – Separation of a Mixture of Solids Abstract The mixed solution contained benzoic acid‚ iron‚ table salt‚ and sand. When separated using water‚ fuel‚ or a magnet‚ their characteristics and properties changed. The mass of the entire mixed solids was 6.6 grams. When the magnet was used‚ the iron was immediately picked up. The mass for that was 1.7 grams. The table salt was 1.2 grams. Benzoic acid mass was 0.8 grams and the sand was 1.4 grams after being separated. Introduction The objective
Premium Water
Katie Arrington 09/18/2012 09/19/2012 Title: Separation of Mixtures and Solids Purpose: The purpose of this experiment was to practice the process of separating mixtures of different solids. Procedure: This experiment consisted of different processes to separate a mixture of solids into the four individual solids: sand‚ benzoic acid‚ iron fillings‚ and sodium chloride. To remove the iron fillings from the mixture I used a magnet and scanned it across the entire mixture and the magnet
Premium Separation process Evaporation Mixture
Lab 2: Separation of Mixtures and Solids Purpose: The purpose of this lab is to become familiar with the separations of mixtures and solids. Pre-lab predictions: Data: Data Table 1: Experiment Data | | Grams | Percentage of Mixture | Iron Filings | 2.0g | 26.67% | Sand | 1.6g | 21.33% | Table Salt | 2.4g | 32.00% | Benzoic Acid | 1.2g | 16.00% | Total | 7.5g | 96% | Observations: While the water was boiling with the three solids (salt‚ benzoic acid‚ and sand) the water got
Premium Water
LAB 4 – SEPARATION OF A MIXTURE OF SOLIDS Purpose: To determine and execute the separation of mixture of solids through different means. Examples are magnetisms‚ evaporation‚ and filtration. Observations and Experimental Data: Data Table 1: Experiment Data Grams Percent of mixture Iron filings 1.4 g 31.1 % Sand 1.3g 28.9 % Table salt 1.0g 22.2% Benzoic acid .8g 17.8 % Total 4.5g 100% Questions: A. How did your proposed procedures or flow charts
Premium Mixture Water Separation process
LS Separation of Mixtures and Solids Purpose: To become familiar with the separation of mixtures of solids Hypothesis: I will be able to separate the materials using a variety of different methods. First‚ separate the iron fillings using a magnet. Second‚ I will put the rest of the solution into water and separate the insoluble sand from the soluble salt and benzoic acid. Third‚ I will filter out the benzoic acid when crystalized. Lastly‚ I will evaporate the water away leaving crystallized
Premium Water Sodium chloride
Exercise No. 8 CARBOXYLIC ACIDS AND ACID DERIVATIVES I. OBJECTIVES: • To investigate the physical and chemical properties of Carboxylic acid and its derivatives • To understand the reactions of carboxylic compounds and derivatives. II. EXPERIMENTAL RESULTS Solubility of Carboxylic acids in 10% NaHCO¬3 Acetic acid - formation of bubbles Benzoic acid - formation of bubbles Test for Acetic acid NaOH + Acetic acid - blue litmus paper turned red NaOH + Acetic acid + FeCl3 - red colored
Premium Acetic acid Carboxylic acid Ester
devising a separation and purification scheme for a three component mixture. The overall objective is to isolate in pure form two of the three compounds. This was done using extraction‚ solubility‚ crystallization and vacuum filtration. The experiment was carried out two times‚ both of which were successful. Background Information: This experiment combined all the knowledge of the previous labs performed throughout the semester. An unknown mixture containing an organic acid or base and
Premium Solvent Solubility Ethanol
Separation of a Mixture of Solids My Flow Chart First remove iron filings with magnet since this is the only substance in the mixture that it is magnetic and will be attracted to a magnet. Second remove the sand by adding the mixture to hot water‚ which the other two substances are soluble. Third remove the benzoic acid since this is less soluble in cold than salt by cooling the mixture in the heated water. This will then leave the table salt behind in the water as the last substance.
Premium Water Flowchart Evaporation