Lab 3 – Separation of a Mixture of Solids Cathy Lab Partners: Chelsea Brooke Sept 4‚ 2012 Chemistry 131A Dr. Vicki H Audia Pelab Questions: Proposed procedure for separation of a mixture: Use physical properties of the 4 substances to separate. 1. Remove iron with magnet 2. Add water to the mixture to melt the benzoic acid and NaCl then filter out sand. 3. Chill the solution and scoop the acid out leaving a salt solution. 4. Boil water away leaving salt. Purpose: The
Premium Chemistry Psychology Sociology
CHE 107 24 June 2013 Separation of a Mixture of Solids Step 1: Separating out the Iron Mass of weighing dish: 0.7g Mass of weighing dish and mixture: 5.4g Net mass of the original mixture: 4.7g Mass of 10-cm square paper: 0.8g Mass of 10-cm square paper and iron fillings: 2.0g Net mass of iron filings: 1.2g Step 2: Separating out the Sand Mass of weighing dish: 0.7g Mass of weighing dish and dry sand: 1.7g Net mass of the dry sand: 1.0g Step 3: Separating out the Benzoic
Premium Salt Chlorine Sodium chloride
Separation of a Mixture of Solids Lab: Separation of a Mixture of Solids Experiment PURPOSE The purpose of this experiment was to learn how to separate a mixture of solids. DATA | | |Data Table 1: Experiment Data | | |Grams |Percent of mixture | |Iron filings |2.2
Premium Separation process Mixture Analytical chemistry
many materials we use today are actually mixtures of pure substances. The separation of these materials into their pure substances can be quite challenging. When we are discussing separations of a mixture that contains pure substances‚ it all depends on whether you can separate the substances by physical means. That means‚ utilizing each substances physical properties such as boiling point‚ melting point‚ and magnetism. Separation of a Mixture of Solids Lab Report Assistant
Premium Water Sodium Sodium chloride
Separation of a Mixture of Solids My Flow Chart First remove iron filings with magnet since this is the only substance in the mixture that it is magnetic and will be attracted to a magnet. Second remove the sand by adding the mixture to hot water‚ which the other two substances are soluble. Third remove the benzoic acid since this is less soluble in cold than salt by cooling the mixture in the heated water. This will then leave the table salt behind in the water as the last substance.
Premium Water Flowchart Evaporation
Lab 2: Separation of Mixtures and Solids Purpose: The purpose of this lab is to become familiar with the separations of mixtures and solids. Pre-lab predictions: Data: Data Table 1: Experiment Data | | Grams | Percentage of Mixture | Iron Filings | 2.0g | 26.67% | Sand | 1.6g | 21.33% | Table Salt | 2.4g | 32.00% | Benzoic Acid | 1.2g | 16.00% | Total | 7.5g | 96% | Observations: While the water was boiling with the three solids (salt‚ benzoic acid‚ and sand) the water got
Premium Water
with the separation of mixtures of solid and learn separation techniques based on the chemical properties of a substance. PROCEDURES 1. Separating out the Iron a. Use your digital scale to determine the mass of your weighing dish. b. Empty the entire mixture of solids from the plastic bag into the weighing dish and determine the gross mass of the total mixture and weighing dish. Compute the net mass of the mixture: this is equal to the gross mass of the weighing dish with the mixture less the
Premium Water Sodium chloride Salt
Lab #2 – Separation of a Mixture of Solids Abstract The mixed solution contained benzoic acid‚ iron‚ table salt‚ and sand. When separated using water‚ fuel‚ or a magnet‚ their characteristics and properties changed. The mass of the entire mixed solids was 6.6 grams. When the magnet was used‚ the iron was immediately picked up. The mass for that was 1.7 grams. The table salt was 1.2 grams. Benzoic acid mass was 0.8 grams and the sand was 1.4 grams after being separated. Introduction The objective
Premium Water
Experiment 2: Separation of a Mixture of Solids Purpose: This experiment allowed me to learn different separation techniques for various substances based on their specific chemical properties. Procedure: I began this experiment by using a magnet to pick up and collect the iron filings out of the mixture. Then the sand was separated by placing the mixture into a beaker and boiling it in distilled water in order to dissolve the salt and benzoic acid‚ once boiling the liquid was poured out leaving
Premium Water Distillation
LAB 4 – SEPARATION OF A MIXTURE OF SOLIDS Purpose: To determine and execute the separation of mixture of solids through different means. Examples are magnetisms‚ evaporation‚ and filtration. Observations and Experimental Data: Data Table 1: Experiment Data Grams Percent of mixture Iron filings 1.4 g 31.1 % Sand 1.3g 28.9 % Table salt 1.0g 22.2% Benzoic acid .8g 17.8 % Total 4.5g 100% Questions: A. How did your proposed procedures or flow charts
Premium Mixture Water Separation process