Lab 2: Separation of Mixtures and Solids Purpose: The purpose of this lab is to become familiar with the separations of mixtures and solids. Pre-lab predictions: Data: Data Table 1: Experiment Data | | Grams | Percentage of Mixture | Iron Filings | 2.0g | 26.67% | Sand | 1.6g | 21.33% | Table Salt | 2.4g | 32.00% | Benzoic Acid | 1.2g | 16.00% | Total | 7.5g | 96% | Observations: While the water was boiling with the three solids (salt‚ benzoic acid‚ and sand) the water got
Premium Water
LAB 4 – SEPARATION OF A MIXTURE OF SOLIDS Purpose: To determine and execute the separation of mixture of solids through different means. Examples are magnetisms‚ evaporation‚ and filtration. Observations and Experimental Data: Data Table 1: Experiment Data Grams Percent of mixture Iron filings 1.4 g 31.1 % Sand 1.3g 28.9 % Table salt 1.0g 22.2% Benzoic acid .8g 17.8 % Total 4.5g 100% Questions: A. How did your proposed procedures or flow charts
Premium Mixture Water Separation process
LS Separation of Mixtures and Solids Purpose: To become familiar with the separation of mixtures of solids Hypothesis: I will be able to separate the materials using a variety of different methods. First‚ separate the iron fillings using a magnet. Second‚ I will put the rest of the solution into water and separate the insoluble sand from the soluble salt and benzoic acid. Third‚ I will filter out the benzoic acid when crystalized. Lastly‚ I will evaporate the water away leaving crystallized
Premium Water Sodium chloride
Exercise No. 8 CARBOXYLIC ACIDS AND ACID DERIVATIVES I. OBJECTIVES: • To investigate the physical and chemical properties of Carboxylic acid and its derivatives • To understand the reactions of carboxylic compounds and derivatives. II. EXPERIMENTAL RESULTS Solubility of Carboxylic acids in 10% NaHCO¬3 Acetic acid - formation of bubbles Benzoic acid - formation of bubbles Test for Acetic acid NaOH + Acetic acid - blue litmus paper turned red NaOH + Acetic acid + FeCl3 - red colored
Premium Acetic acid Carboxylic acid Ester
Separation of a Mixture of Solids My Flow Chart First remove iron filings with magnet since this is the only substance in the mixture that it is magnetic and will be attracted to a magnet. Second remove the sand by adding the mixture to hot water‚ which the other two substances are soluble. Third remove the benzoic acid since this is less soluble in cold than salt by cooling the mixture in the heated water. This will then leave the table salt behind in the water as the last substance.
Premium Water Flowchart Evaporation
Chromatographic Separation of Sodium Fluorescein and Methylene Blue In this two-part lab the students will: • Learn the techniques associated with thin layer and column chromatography. • Determine the effects of the stationary phase in separating a mixture by chromatography. • Determine the effects of the mobile phase in separating a mixture by chromatography. • Conduct a separation using column chromatography. In the first week‚ the students will determine the best solvent system for
Free Chromatography Thin layer chromatography Ethanol
BASIC SEPARATION TECHNIQUES Contemporary modifications of filtration and dialysis use a matrix-based fibrous material that provides a mechanism of separation in many homogeneous immunoassays. These materials may be coated with specific antibody-ligand to foster selection of specific materials or species. Certain labels use magnetic particles in conjunction with strong magnets to effect separation. Basic universally used separation mechanisms‚ outside of those incorporated in immunoassay‚
Premium Filter paper Analytical chemistry
by everyday pollution from houses‚ factories‚ cars‚ and etc. This is the concept of acid rain‚ which according to EPA.gov is a broad term referring to a mixture of wet and dry deposition from the atmosphere containing higher than normal amounts of nitric and sulfuric acids. Acid rain isn’t just rain‚ its forms like hail or snow‚ which is wet deposition‚ and smoke or dust‚ which is dry deposition. The effects of acid rain are quite terrifying bringing all types of problems to the Earth‚ for example
Premium Water Acid rain Precipitation
Separation of a Mixture of Solids I really enjoyed this lab. After reading the introduction I started by making my own flow sheet of how I thought this lab would work. I was reminded about solubility which is defined as the amount of the solute that will dissolve in a given amount of solvent and that the extent to which a substance dissolves depends mainly upon the physical properties of the solvent and of the solute and to some extent upon the solvent’s temperature. With that being said I came
Premium Solubility Oxygen Solvent
12:30-4:30 Hyejin Cho 12 June 2013 Separation of a Mixture Abstract: In this experiment‚ the three processes of extraction‚ sublimation and recrystallization will be used to separate a mixture of salicylic acid and naphthalene. The first part of extraction will be to separate the salicylic acid from the naphthalene using diethyl ether and aqueous sodium bicarbonate. The naphthalene will reside in the ether and be the top layer‚ while the salicylic acid resides in the sodium bicarbonate bottom
Premium Separation process Chemistry Chemical substance