Back Laboratory Program SAFETY IN THE CHEMISTRY LABORATORY 786 Pre-Lab Extraction and Filtration 790 1-1 Mixture Separation 792 1-2 Water Purification 794 3-1 Conservation of Mass 798 4-1 Flame Tests 801 Pre-Lab Gravimetric Analysis 828 13-1 Separation of Pen Inks by Paper Chromatography 830 13-2 Colorimetry and Molarity 834 14-1 Testing Water 838 804 7-1 Separation of Salts by Fractional Crystallization 806 7-2 Naming Ionic
Premium Water Chemistry Drinking water
Williams‚ Brandon Physics‚ Period 1 23 May‚ 2014 Resonance Lab Purpose: To determine the speed of sound using the resonance method‚ temperature method and percent error. Hypothesis: If the temperature of the room’s 20 degrees C‚ then using the temperature method‚ the speed of sound is 344m/s. Vs – Vo + 0.6m/s T / C = 332 m/s + .6 m/s (20 C) / C = 344 m/s Conclusion: Using the resonance method the speed was 330 m/s. using the average temperature
Premium
ChE-309 Chemical Engineering Laboratory-I Laboratory Manual Second Edition (2001) Edited by S. U. Rahman Department of Chemical Engineering King Fahd University of Petroleum & Minerals Dhahran-31261‚ Saudi Arabia Preface This laboratory manual is prepared by the department of chemical engineering for Chemical Engineering Laboratory-I (ChE-309). It is divided into three sections; namely‚ Fluid Mechanics‚ Heat Transfer and Mass Transfer. The purpose of this manual is to serve as instructional
Premium Experiment Laboratory Chemistry
Calorimetry Lab Problem: Which foods have the most calories? Hypothesis: If we burn the food then the heating released will be measured as calories because the energy stored inside is released as heat and light. Parts of the experiment Control Group-water Experimental Group- different foods Independent variable- Type of food Dependent Variable- temperature of water Controlled variables- water temperature of unheated water Materials Stirring Rod‚ Beaker‚ ring clamp‚ evaporating disk‚
Premium Energy Heat Temperature
Lab Report Problem: What method would consistently test the foam and ensure it has the correct density? Background: There are words that need to be understood before executing the experiment. The first thing you need to know is density. Density is a measure of mass per unit of volume. The reason for testing density of doors because doors must contain a density of 14.34lbs per ft3 of foam‚ or it will collapse if the density is too high. If the density is too low‚ it won’t allow for normal expansion
Premium Density Volume Water
Lab Report: Titration Lab Prepare a solution of a given concentration; understand titration including acid-base reactions‚ pH‚ stoichiometry and molar equivalence. Chemicals and equipment: NaOH pellets close to purity‚ HCl 3M‚ phenolphtalein Beckers‚ flasks‚ burette‚ magnetic or manual stir pHmeter Waste management: The waste disposal will be handled through neutralization of your excess reactant to a pH between 4.0 and 10.0 and disposal with abundant rinsing. As a preparation for the
Free Titration
LAB REPORT Introduction: In a chemical change‚ the identities of substances change and new substances form. In an equation the substances on the left are the reactants. The substances on the right are the products. In this experiment the objectives are to observe evidence that a chemical change has taken place. Infer from observations that a new substance has been formed. Identify and record observations that show energy is involved in chemical change observe the color‚ solubility of some substances
Premium Chemical reaction Chemistry Hydrogen
Thermodynamics- Enthalpy of Reaction and Hess’s Law Objectives: 1. To calculate the heat of reaction of a given reaction using the concepts derived from Hess’s Law. Pre-lab Questions: 1. Define Heat of Reaction. The enthalpy change associated with the completion of a chemical reaction. 2. Define Specific Heat. The energy it takes to raise the temperature of 1 gram of a substance by one degree Celsius. 3. Calculate the heat of reaction assuming no heat is lost to the calorimeter. Use correct
Premium Thermodynamics Temperature Enthalpy
Physics Domino Lab I. Problem: What spacing between the Domino’s will provide the fastest velocity for a line of falling Domino’s. II. Background: The Domino C.I.M. lab that we have been assigned brings forth the question of the compression of a line of Domino’s. The question is‚ what set up of Domino’s has the fastest compression time. We intend on testing this by lining up different strings of Domino’s and finding which variable of distance has the greatest compression velocity
Premium Acceleration Classical mechanics General relativity
Laboratory Report The purpose of a formal report is to communicate effectively to another person the goal‚ procedure‚ data analysis method‚ and results of your laboratory work. The report is divided into several well-defined sections. Each section must be present in a complete report. To earn an outcome point for the laboratory report‚ a student must submit a formal lab report that earns a score of at least 90/100. Each error (factual‚ grammatical‚ typographical‚ spelling) results in a deduction
Premium Chemistry Experiment