Explore Download 0CommentLinkEmbedof 6Readcast0 inShare Xavier Bourret-Sicotte Physics18/09/2007 Measuring the speed of sound In this experiment‚ we will measure the speed of sound.The apparatus consisted of a plastic tube filled with water linked to a water container. Thiscontainer could be displaced vertically in order to change the water level. We would thenmake a tuning fork vibrate above the pipe and change the water level until the resonance wasat maximum intensity.Hypothesis: The
Premium Speed Frequency Measurement
Karunakaran Physics Honors Period 6 Physics Kinematics Lab Report Kinematics is the study of the motion of bodies without reference to mass or force. This lab aided students in observing kinematics by giving them a visual graph to look at from experiments previously performed. Variables used in this lab were “x” for position of the object‚ “v” for velocity of the object‚ and “a” for acceleration of the object. Understanding the graphical representation of motion was important
Premium Acceleration Velocity Kinematics
Physics 223-101 Atwood’s Machine DATA TABLE Part 1: Keeping Total Mass Constant | Trial | m1(g) | m2(g) | Acceleration(m/s2) | Δm(kg) | mT(kg) | 1 | 200 | 200 | 0 | 0 | 0.400 | 2 | 205 | 195 | -0.174 | 0.01 | 0.400 | 3 | 210 | 190 | -0.382 | 0.02 | 0.400 | 4 | 215 | 185 | -0.607 | 0.03 | 0.400 | 5 | 220 | 180 | -0.830 | 0.04 | 0.400 | | | | | | | Part II: Keeping the Mass Difference Constant | Trial | m1(g) | m2(g) | Acceleration(m/s2) | Δm(kg) | mT(kg) | 1 |
Premium Harshad number Mass Angle
PHYS 211 Physics for Science and Engineering Experiment 1: Projectile Motion Physics Lab Report 3 OBJECTIVE The objective of the experiment is to measure the speed at which a projectile leaves a spring gun and to predict the landing point when the projectile is fired at a nonzero angle of elevation. EQUIPMENT Spring gun Metal ball Protractor Meter stick Ruler Whiteboard markers THEORY Projectile motion is an example of motion with a constant acceleration. In this experiment
Free Newton's laws of motion Force General relativity
Solving Part A: Center of Mass in One Direction 1. Since the mass of the plate is a uniform‚ the center of mass is in the center of the plate. The plate has diameter d = 28 cm‚ thus the center of mass is 14 cm from the edge of the plate. In the lab‚ two scenarios will be analyzed; 1) when the glass is standing up‚ and 2) when the glass is laying on its side. When the glass is standing up‚ its mass is uniform about the axis of symmetry. Therefore‚ the horizontal center of mass will be at the exact
Premium Dimension Analytic geometry Mass
IEEE TRANSACTIONS ON POWER ELECTRONICS‚ VOL. 22‚ NO. 1‚ JANUARY 2007 Modulation-Based Harmonic Elimination Jason R. Wells‚ Member‚ IEEE‚ Xin Geng‚ Student Member‚ IEEE‚ Patrick L. Chapman‚ Senior Member‚ IEEE‚ Philip T. Krein‚ Fellow‚ IEEE‚ and Brett M. Nee‚ Student Member‚ IEEE Abstract—A modulation-based method for generating pulse waveforms with selective harmonic elimination is proposed. Harmonic elimination‚ traditionally digital‚ is shown to be achievable by comparison of a sine wave
Premium Modulation
Phil Yu Electrostatics Lab Data Chart Part 1: Trial | Material | Material | Charge (+ or -) | q (nC) | 1 | Glass | Fur | + | 3.108 | 2 | Clear Plastic | Fur | + | 45.07 | 3 | Yellow Plastic | Fur | - | 81.57 | 4 | Glass | Silk | + | 1.979 | 5 | Clear Plastic | Silk | + | 19.60 | 6 | Yellow Plastic | Silk | - | 75.49 | 7 | Glass | Green Cloth | + | 2.914 | 8 | Clear Plastic | Green Cloth | + | 31.09 | 9 | Yellow Plastic | Green Cloth | - | 90.30 | Data Chart Part 2:
Premium Electric charge Concentration
Lab 1 – Measurement of Space and Time Anthony Lucci Lab Partner: Amy Hayes Question 4: Both the height and diameter of the cylinder were taken to find the volume; five times for both measurements. Vernier calipers were used to get these measurements by clamping the cylinder between the jaws of the calipers. By looking at the mark of the zero‚ in relation to the main scale‚ the line best lined up with a line from the main scale was taken down. Getting
Premium Measurement Errors and residuals in statistics Volume
Physics Lab Report#3 “Determining the period of a pendulum” Name: Fei Huo Date performed: October 1st‚ 2014 Period 5 Teacher: Mr. Glasel Purpose: The Purpose of this Lab was so that my classmates and I can examine what kind of factors affect the period of a pendulum. Introduction: In a simple form‚ the pendulum is a weight hung from a long string that Galileo discovered that it can be used to track the passage of time very accurately around 400 years ago. In this
Premium Pendulum Analytic geometry Dimension
Lab 3. Dc circuits and Ohm’s law of measurments Helina Wolfe Tannaz Farnoudi and Najah Rouse Physics 246-205 Professor Joe Renaud 09/23/13 Word count:1453 Abstract: The aim of this experiment was to understand the relationship between the variables of Ohm’s law and how they are part of an operation of an electric circuit. Introduction: This experiment was done in two parts. The first part consisted of understanding how to determine the current‚ voltage and resistance
Free Resistor Electrical resistance Electric current