Laboratory 2 DRYING OF SOLIDS (Vacuum Tray Dryer) A Final Report Submitted to Engr. Luis K. Cabatingan Instructor‚ ChE 512L By Madeja‚ Rayam John D. July 31‚ 2012 1. Introduction Drying generally means the removal of relatively small amounts of liquid from materials. It is also defined as the transfer of liquid from a wet solid into an unsaturated gas phase. The goal of most drying operations is not only to separate a volatile liquid‚ but also to produce a dry solid of a desirable size
Premium Time
AMERICAN INTERCONTINENTAL UNIVERSITY SUBJECT: Municipal Solid Waste Descriptions and Problems ABSTRACT: The Municipal Solid Waste is based in 4 main components that are recycling‚ composting‚ landfilling and waste-to-energy that is mainly done by burning the waste. This is known as materials of no longer being of value and is thrown out for disposal. Waste is handled and separated into different containers which are divided into solids‚ plastics and paper mainly. There are different types of
Free Recycling Waste management Landfill
Impacts of solid waste on health The group at risk from the unscientific disposal of solid waste include – the population in areas where there is no proper waste disposal method‚ especially the pre-school children; waste workers; and workers in facilities producing toxic and infectious material. Other high-risk group include population living close to a waste dump and those‚ whose water supply has become contaminated either due to waste dumping or leakage from landfill sites. Uncollected solid waste
Premium Hazardous waste Waste management Pollution
Student ID No: ___________________ Pages: 9 Questions: 5 EXAMINATIONS FOR DEGREES AND DIPLOMAS October-November 2008 Mechanics of Solids First and only paper Time Allowed: THREE (3) hours Instructions: Answer all questions. -2- Question 1 Figure 1 Two circular A-36 steel1 rods are connected as shown in Figure 1. The rod CD has a diameter of 30mm. Both members are pin connected together at C (see figure detail). You are asked to determine: a b Identify what kind of structural
Premium Force Shear strength Continuum mechanics
Individual solid particles are characterised by their size‚ shape‚ and density. 1.1 Particle shape The shape of an individual particle is expressed in terms of the sphericity F s‚ which is independent of particle size. The sphericity of a particle is the ratio of the surface-volume ratio of a sphere with equal volume as the particle and the surface-volume ratio of the particle. For a spherical particle of diameter D p‚ F s =1; for a non-spherical particle‚ the sphericity is defined as Dp:
Premium Arithmetic mean Volume Area
Class 4 – Flammable Solids Division 4.1 – Flammable Solids are: • Wetted explosives that are Class 1 explosives when dry‚ that are sufficiently wetted to suppress explosive properties. • Self-reactive materials that are thermally unstable and can undergo strong exothermic decomposition even in the absence of oxygen. Readily combustible solids that can cause fire through friction‚ such as matches. Powdered‚ granular or pasty materials must be classified as Division 4.1 when the time of burning of
Premium Metal Calcium Liquid
Implementation on Solid Waste Management of Boarding Houses A Research Proposal Presented to the Faculty of Arts and Sciences Surigao del Sur State University Main Campus Tandag City In Partial Fulfillment Of the requirements for The Subject Research Rovie Galagar Saz Chapter 1 THE PROBLEM AND ITS SETTING Introduction Solid Waste Management‚ the collecting‚ treating‚ and disposing of solid material that is discarded because it has served its purpose or is no longer useful
Free Waste management Waste Recycling
MECH 223 Solid Mechanics L51 Spring 2013 Term Project Group no. (6) Course Instructor: Dr. Mohammed Al-Qaradawi T.A: Eng. Salim Mohandes Group members: Amal Bsaisu 201002072 Nada Mamdouh 201105374 Nazha Ghadban 201104186 Ola Al-Masri 201103017 Samar Nasr 201000137 Due Date: 3-6-2013 Abstract: In this project we were asked to select an object (L shaped)‚ and apply the outcomes of Solid Mechanics course
Premium Shear stress Force
SOLID STATE MARKS = 04 SOLID STATE A solid is that form of matter that possesses a definite shape and a definite volume. There are two types of solids: Crystalline solids: Solids with a definite geometric pattern and are anisotropic in nature. Examples: Iron‚ copper‚ silver‚ sulphur etc. are some elements which form crystalline solids. Potassium chloride‚ sodium nitrate etc are some of the compounds‚ which are crystalline
Premium Crystal system Crystal Crystal structure
Introduction to Modern Physics Prof. Ioan Kosztin Lecture #23 Solid State Physics • Bonding in solids (metals‚ isolators‚ semiconductors) • Classical free electron theory of metals • Quantum theory of metals • Band theory of solids • Semiconductors • Lasers Classification of solids • Phases of matter: • solid (well defined shape and volume) • liquid (only well defined volume) • gas (no defined shape or volume) • plasma (an overall neutral collection of charged and neutral particles) • Solids • crystalline
Premium Solid Electron Metal