Ex. plastics that have so changed society and the natural and synthetic fibers used in clothing are polymers. Classification of polymers Homopolymers - consist of repeated long chains or structures of the same monomer unit. Ex. PVC(polyvinyl chloride) Copolymers - polymers that consist of more than one molecule. Trimers - molecules consisting of 3 monomer units. Tetramers- 4 monomer-unit compounds polymerization In polymer chemistry‚ is a process of reacting monomer molecules together
Premium
Experiment 23: Synthesis of an Alkene April 5‚ 2013 Purpose: Results and Discussion The weight of our n-Butyl Bromide sample (actual yield) was 0.09g. The percent yield was found to be 4.38%. Only 0.09g of the theoretical 2.055g yield was obtained. The boiling point was 104° C‚ which is higher than the literature value of 101° C. This is due to the sample being somewhat impure‚ as impurities tend to increase boiling point. When IR spectroscopy was performed‚ there were no OH stretches
Premium Water Yield Distillation
Conclusion: ¬¬The goal of the first part of this experiment was to achieve a 50-50 conversion of fluorene to Fluorenone. In order to achieve the goal of the experiment fluorene was oxidized to Fluorenone. The hydroxide ions from the sodium hydroxide in the presence of Stark’s catalyst would be able to de-protonate the acidic fluorene protons. This would result in the formation of a carbanion which attacks the oxygen from the air resulting in the formation of a hydroperoxide and eventually a ketone
Premium Chemistry Hydrogen Chemical reaction
Experiment 14: Preparation of 1-Bromobutane Goal: To prepare 1-Bromobutane by the SN2 reaction from 1-Butanol with Sodium Bromide and Sulfuric Acid. Mechanism: Procedure: 1. Place 27g of NaBr‚ 20mL of n-butyl alcohol‚ and 30mL of water into a 250mL round bottom flask. 2. Put the mixture in an ice-water batch and cool briefly‚ then slowly add 23 mL of conc H2SO4 while stirring with a magnetic stirrer. 3. Place a water-cooled condenser and heat the flask until the mixture boils while
Premium Distillation
David Kennedy CHE 235 Lab 10/30/14 Scale-up Synthesis and Characterization of Butyl 2-Cyano-3-(3‚5-dichloro-phenyl)-2-propenoate‚ TSE Project #131 Introduction: This report describes the steps taken to create the scale-up of targeted trisubstituted ethylene‚ Butyl 2-Cyano-3-(3‚5-dichloro-phenyl)-2-propenoate compound (#131)‚ and also the characterization methods deployed to the results. This report serves as a critical step in the overall objective of the project; the synthesis of the copolymer
Premium 3rd millennium Stoichiometry Chemical reaction
Standard Methods for the Examination of Water and Wastewater 5210 BIOCHEMICAL OXYGEN DEMAND (BOD)*#(1) 5220 CHEMICAL OXYGEN DEMAND (COD)*#(2) 5220 A. Introduction Chemical oxygen demand (COD) is defined as the amount of a specified oxidant that reacts with the sample under controlled conditions. The quantity of oxidant consumed is expressed in terms of its oxygen equivalence. Because of its unique chemical properties‚ the dichromate ion (Cr2O72–) is the specified oxidant in Methods
Premium Sample size Chemical oxygen demand Biochemical oxygen demand
Identification: * Testing for Macromolecules * September 20‚ 2012 – September 25‚ 2012 * SBI4U1-01 * Rebekah Alto‚ Chayene Banta‚ Taylor Denton‚ Sarosh‚ Brianna Madar * Mrs. Kolobaric Purpose: To use a set of standardized procedures to test for simple sugars and starch‚ proteins‚ and fats. Hypotheses: A.) B.) C.) Equipment: -Safety goggles -Lab apron -400 mL beaker -Utility stand with ring clamp -Hot plate
Premium Nutrition Cholesterol Starch
Experiment 3 Objectives Separation by Solvent Extraction To separate a mixture consisting of a carboxylic acid and a neutral compound by using solvent extraction techniques. Introduction Frequently‚ organic chemists must separate an organic compound from a mixture of compounds‚ often derived from natural sources or products of synthetic reactions. One technique used to separate the mixture compounds is called extraction. Extraction is a process
Premium Solubility Solvent Acetic acid
Introduction In this lab‚ caproic acid was synthesized in a multi-step process that involved the synthesis of three intermediates – diethyl n-butylmalonate‚ potassium n-butylmalonate‚ and n-butyl malonic acid respectively. An IR was used to characterize the starting material‚ n-bromobutane‚ and the first intermediate‚ diethyl n-butylmalonate; while IR and NMR were used to characterize the final product‚ caproic acid. Reactions‚ Mechanism and Theory Caproic acid a.k.a n-hexanoic acid is a carboxylic
Premium Distillation Carboxylic acid Alcohol
Name: David Kennedy Date: 11/5/14 Project No: 131 Title: Butyl 2-Cyano-(3‚5 dichloro-phenyl)-2-propenoate Abstract: The targeted trisubstituted ethylene compound Butyl 2-Cyano-(3‚5 dichloro-phenyl)-2-propenoate and its copolymer with styrene was prepared in this lab. The base catalyzed Knoevengael condensation of butyl cyanoacetate and corresponding aldehyde led to the forming Butyl 2-Cyano-(3‚5 dichloro-phenyl)-2-propenoate. The analyses that were used to prove its composition and structure
Premium Thin layer chromatography Stoichiometry 3rd millennium