acceleration and range for initial fuel flows were calculated. Two numerical methods‚ Euler’s integration and 4th order Runge-Kutta integration are used for calculating different parameters for the vertically launched rocket. The efficiency and the accuracy of the methods were compared. It was found out that the 4th order Runge-Kutta is more efficient than Euler’s integration method for the given time step. Also for the rocket given the optimal initial fuel mass flow rate for attaining the highest altitude
Premium Force Acceleration Mass flow rate
Dated: 12-04-2013 STEPS INVOLVED IN THE SELECTION FLOW METER There are well over 20 different types of flow meters‚ even if we lump the various positive-displacement flow meters together as one type. Unless the process engineer knows the pros and cons of each type‚ it can be a daunting task to properly select one. Here are just some of the factors to consider before selecting a flow meter: • Its size and measuring range of the flow meter • Chemical compatibility • Process accuracy requirements•
Premium Fluid dynamics Viscosity Fluid mechanics
Will Honey Flow At A Quicker Pace When Temperature Is Increased? Hypothesis: Honey will flow quicker when heated. Aim: To discover whether honey will flow at a quicker pace when temperature is increased. Equipment: 500g Homebrand Woolworths Australian Honey Chopping Board Something to rest chopping board on (to create a ramp) Newspaper Tea Towel Stopwatch 2 plates 3 teaspoons Microwaveable Mug Risk Analysis: Hazard Risk How to Minimise Risk Hot Honey Burns Handle any hot equipment
Premium Heat Tea Honey
Introduction The water system in any pharmaceutical organization is of vital importance. It is widely used in pharmaceuticals and related industries. Water used in process and in cleaning must be pure and free from microbial and chemical impurities. Laboratories need pure water free of foreign substances‚ which could potentially affect the outcome of analyses‚ and the pharmaceutical industry needs pure water for a variety of purposes – everything from cleaning to the use of pure water as an ingredient
Premium Water Water Mass flow meter
EXPERIMENT (4) FLOW MEASUREMENT By: Eng. Motasem M. Abushaban. Eng. Fedaa M. Fayyad. PURPOSE: To study some of the famous instruments used in flow measurements. The measurement of water flow rate is an important topic in the study of fluid dynamics. There are many instruments used in flow measurements such as : o Venturi o Orifice plate o Variable area meter DESCRIPTION OF APPARATUS Water Flow Measuring Apparatus is designed as a free-standing apparatus for use on the
Premium Fluid dynamics
Lecture No. 5 CLASSIFICATION OF FLUID FLOW AND THE CONTINUITY EQUATION 5.1 Classification of Fluid Flow Uniform flow If the velocity of the fluid is the same in magnitude and direction at every point in the fluid the flow is said to be uniform. Non-uniform flow A non-uniform flow is one where the velocities at different points at a given instant are not the same. Every fluid that flows near a solid boundary will be non-uniform because the fluid at the boundary takes the velocity of the
Premium Fluid dynamics
Calibration of Volumetric Glassware Nur Farah Nabilah Binti Ahmed Zhaini Muhammad Imanuddin Bin Azman Maisarah Binti Alias Summary In this experiment‚ The purpose of this experiment is to investigate the measurement of the actual volume contents of volumetric glassware. In the beginning of the experiment‚ the volumetric glassware should be clean and dry before used. The volumetric glassware‚ measuring cylinder and pipette should be handled with care and all the precautions
Premium Measurement Laboratory glassware Density
Analysis of Soda Ash and Volumetric Analysis of a Carbonate-Bicarbonate Mixture Belardo‚ Pia Jobelle J. Department of Chemical Engineering‚ Faculty of Engineering University of Santo Tomas España‚ Manila February 27‚ 2013 Abstract The analyte used is the soda ash which is titrated with an HCl titrant‚ standardized by Na2CO3. The indicators used are phenolphthalein for basicity and methyl orange for acidity. The two volumes of the titrant are then used to calculate percent composition of
Premium Titration Sodium hydroxide Hydrochloric acid
OBJECTIVES The objective of the experiment was To calibrate a 10 mL volumetric pipette To calibrate a 25 mL volumetric pipette To calibrate a 100 mL volumetric flask To calibrate a 50 mL measuring cylinder INTRODUCTION The purpose of this experiment is to study the relationship of several types of volumetric glassware and the accuracy of measuring the volumes of liquids very precisely in quantitative laboratory work. The accuracy of the measurement the volumes is the degree of closeness
Premium Measurement Laboratory glassware Metrology
ME 4600:483 – Lab Notes Revised 04/07/05 Flow Measurement Table of Contents Flow Measurement ......................................................................................................................... 1 I. Objective ................................................................................................................................. 1 II. Apparatus...................................................................................................................
Premium Fluid dynamics Pressure