between hydrochloric acid and sodium thiosulphate is affected by the concentration of the acid Simple Procedure Place a conical flask on a piece of paper with a cross on it. Add hydrochloric acid and sodium thiosulphate‚ and record the amount of time taken for the cross to disappear through the solution from the top of the flask. Record this time and repeat this for different concentrations of hydrochloric acid. Fair Test The variables in this test are: The concentration of hydrochloric acid
Premium Chemical reaction Chemistry Concentration
Hydrometallurgy 105 (2010) 148–154 Contents lists available at ScienceDirect Hydrometallurgy j o u r n a l h o m e p a g e : w w w. e l s ev i e r. c o m / l o c a t e / h yd r o m e t Treatment of copper flash smelter flue dusts for copper and zinc extraction and arsenic stabilization A. Morales a‚ M. Cruells b‚ A. Roca b‚⁎‚ R. Bergó b a b Universidad Católica del Norte‚ Department of Metallurgical Engineering‚ Antofagasta‚ Chile Universitat de Barcelona‚ Department of Materials Science and Metallurgical
Premium Copper Sulfuric acid Smelting
The aim for this investigation is to investigate the effects of varying the concentration of sodium thiosulfate solution on the rate of the reaction when reacting with dilute hydrochloric acid. It is hypothesized that as the concentration of the sodium thiosulfate solution increases‚ the rate of the reaction will also increase proportionately. Variables The independent variable is concentration. This will be varied by increments of 10mL (10mL to 50mL) and distilled water will be added accordingly
Premium Chemical reaction Chemistry Chlorine
The rate of reaction between sodium thiosulphate and hydrochloric acid Candidate name: Yeo Jin Kim (Kimberly Kim) Candidate number: 000791-021 Teacher: Yitao Duan 1.0 Aim The aim of this experiment is to investigate the changing of concentration effect the rate of reaction between sodium thiosulphate and hydrochloride. 2.1 Chemical Equation 2.0 Raw data 3.2 Qualitative Data 2.1.1 Before the experiment Substance | Color | State | Smell | Hydrochloride (HCl) | Colorless
Premium Chemical reaction Sodium Chemistry
when you put zinc in copper II sulfate? • What will happen when you put copper in copper II sulfate? Predictions: • We can predict that zinc will react with the aqueous solution of copper II sulfate and we will notice a reaction. We can also predict that the copper will not react with the solution of copper II sulfate and no reaction will be noticed. Hypothesis: • It is hypothesized the zinc metal will have a precipitation reaction with the solution of copper II sulfate‚ because zinc is more reactive
Premium Water Chemistry Chemical reaction
Main aim of experiment 5 is to use the biuret test to quantify the concentration of the Bovine Serum Albumin (BSA) then constructing a standard curve graph and to use the spectrophotometer to perform an enzyme assay using different concentration of the BSA. Experiment 5 also verifies the Beer-Lambert Law‚ which is the linear relationship between absorbance and concentration of an absorbing species. Absorbance formula is shown in fig. 1.1. However‚ the Beer-Lambert Law is not obeyed at high concentration
Premium Chemistry Concentration Spectroscopy
Aim: To investigate the rate of reaction between Calcium Carbonate and Hydrochloric Acid. Just from looking at the aim of the investigation I already know that a salt would be formed because a carbonate with an acid forms a salt. In this investigation the substance that is formed is Calcium Chloride‚ Water and Carbon Dioxide. The symbol equation for this is: CaCo3  Ca2+ + Co32- Hcl  H+ + Cl- Add these all together to get CaCO3(s) + 2H+(aq) --> Ca++(aq) + H2O + CO2(g) The rate of
Premium Carbon dioxide Chemical reaction Calcium carbonate
reaction was the reaction from the sulfate anion test between Sodium Sulfate and Barium Chloride. If the compound was in fact Sodium Sulfate it would produce a white precipitate and it did. The second reaction was first between Sodium Sulfate and Hydrochloric Acid‚ and then Silver Nitrate was added. For the compound to be confirmed‚ a white precipitate should form again‚ and it did. The next reaction started with the combination of Sodium Sulfate and Ammonia Hydroxide and
Premium Chemistry Chemical reaction Sodium chloride
The collision between the molecules in a chemical reaction provides the kinetic energy needed to break the necessary bonds so that new bonds can be formed. Thus‚ increasing the concentration of the anode‚ zinc sulfate‚ will increases the rate of reaction for oxidation because there are more zinc ions in the new concentration‚ which would also increase the collision between molecules. This will eventually allow an increase in the transferring rate of electrons to the cathode‚ as there are certainly
Premium Electrochemistry Electrolysis Battery
Program: Foundation In Science Unit code: FHSC 1214 Unit description: Fundamentals of Cell Biology Year and trimester of study: 2013‚ trimester 1 Title of lab report: Practical 2 Investigation of Action of Saliva and 3 M Hydrochloric Acid in Two Carbohydrate Solutions Lecturer’s name: Mr. Paul Davidson Discussion The name of enzyme involved in this experiment is salivary amylase‚ which presents in our saliva. Salivary amylase catalyses
Free Enzyme Starch Glucose