Innovate a machine which is easy to use and that cannot tolerate with their accuracy, without affecting the prize of the machine. All over the world the resources of energy are reduced for that we can find new sources of energy. For that machine is both manually and power operated. In India, there is many industries which are engaged in production of manually pipe bending machine. Presently the pipe bending machine is power and manually both operated. But, the manually operated pipe bending machine has less accuracy at high prize. Therefore, our objective is to increase accuracy at low prize without affecting the pipe bending productivity.
INTRODUCTION The Hydraulic Pipe Bender is designed for bending thick-walled pipes. There are different bending dies ranging from 1/2" to 2“. The hydraulic pipe bender is not designed for bending thin-walled pipes. When tubing is bent to a specific shape or geometry, force must be applied so as to exceed the materials 'yield point', which is the material's capability to resist permanent deformation, while staying below the material’s 'ultimate tensile strength', which is the limit of the material's ability to resist tearing. As the tube is bent over a specific radius the outside wall will stretch in tension while the inside wall bends under compressive forces. The boundary line through the centre of the tube, between the tension and compressed zones is called the 'neutral axis'. The 'neutral axis' is the location from which all dimensional calculations are made.
WHY HYDRAULIC PIPE BENDING M/C Tube bending can be done manually, semi-automatically, with CNC equipment, or with dedicated machines.
CNC equipments or automatic M/C:
Requires costly components ,
Limited part complexities,
Greater space required,
Requires operator expertise,
May necessitate water, air and additional electrical power,
Maintenance department aptitude stress. Hydraulic bending machine have low initial investment,