Network Design
Executive SummaryThe objective at hand was to build a network from the ground up. This was accomplished by breaking down all of the sections and building upon all previous assignments. This was a good course as I learned a lot about all of the different sections of building a network.
The pros are now I know how to build a network on the design side from the ground up. I learned quite a bit about using a lot of the technologies associated with networking and it allowed me to learn quite a few new concepts.
Some of the downfalls about this course and what I have learned are I did not feel I accomplished much as there is no hands on training associated with the course. I do not feel like concepts and design ideas are a great resource to actually learn how to use any of the systems but they do give a pretty good idea.
Cabling SpecificationsEthernet is a Local Area Network (LAN) technology with a transmission rate of 10 Mbps and has a typical star topology. Computers and devices must wait-and-listen for transmission time on the network as only one device can transmit at any one time. In order to operate with this network strategy, Ethernet incorporates CSMA/CD (Carrie Sense Multiple Access with Collision Detection). Each device on the network listens for the network to be clear before transmitting data. If more than one computer or device transmits data at the same time, then collisions occur. Once collisions are detected, all devices stop transmitting for a period of time until one of the devices senses the line is free and will then gain control of the line to transmit its data. Receiving devices just sit there waiting and listening for transmissions that are meant for them, which are determined by an IP (Internet Protocol) address.
The main advantage to Ethernet is it is one of the cheapest networks to put into service. Compared to other hardware for Token Ring, Ethernet equipment such as hubs, switches, network interface cards, and cable (Cat5 common) is
The pros are now I know how to build a network on the design side from the ground up. I learned quite a bit about using a lot of the technologies associated with networking and it allowed me to learn quite a few new concepts.
Some of the downfalls about this course and what I have learned are I did not feel I accomplished much as there is no hands on training associated with the course. I do not feel like concepts and design ideas are a great resource to actually learn how to use any of the systems but they do give a pretty good idea.
Cabling SpecificationsEthernet is a Local Area Network (LAN) technology with a transmission rate of 10 Mbps and has a typical star topology. Computers and devices must wait-and-listen for transmission time on the network as only one device can transmit at any one time. In order to operate with this network strategy, Ethernet incorporates CSMA/CD (Carrie Sense Multiple Access with Collision Detection). Each device on the network listens for the network to be clear before transmitting data. If more than one computer or device transmits data at the same time, then collisions occur. Once collisions are detected, all devices stop transmitting for a period of time until one of the devices senses the line is free and will then gain control of the line to transmit its data. Receiving devices just sit there waiting and listening for transmissions that are meant for them, which are determined by an IP (Internet Protocol) address.
The main advantage to Ethernet is it is one of the cheapest networks to put into service. Compared to other hardware for Token Ring, Ethernet equipment such as hubs, switches, network interface cards, and cable (Cat5 common) is
References: bout, Inc. (2004). Network topologies : bus, ring, star, and all the rest. RetrievedOctober 12, 2004, from http://compnetworking.about.com /library/weekly/aa041601a.htmBrain, M. (2004). How stuff works : how wifi works. Retrieved October 12, 2004,from http://computer.howstuffworks.com/wireless-network.htm/printableNetwork Latency. (n.d.). Retrieved April 27, 2008, fromhttp://www.javvin.com/etraffic/network-latency.htmlBroadband Internet. (n.d.). Retrieved April 27, 2008, fromhttp://www.pcworld.idg.com.au/index.php/id;988596323Wide Area Networks.(n.d.). Retrieved April 27, 2008, fromhttp://www.erg.abdn.ac.uk/users/gorry/course/intro-pages/wan.htmlVirtual Private Network. (n.d.).retrieved May 11, 2008, fromhttp://searchsecurity.techtarget.com/sDefinition/0,,sid14_gci213324,00.html#VPN vs. Dial up. (n.d.). Retrieved May 11, 2008, fromhttp://technet2.microsoft.com/windowsserver/en/library/d85d2477-796d-41bd-83fb-17d78fb1cd951033.mspx?mfr=trueHow to Create a Disaster Recovery Plan, RetrievedMay 23, 2008, from http://www.devx.com/security/Article/16390/1954World Internet Usage Statistics, RetrievedMay 23, 2008, from http://www.internetworldstats.com/stats.htm