Nt1310 Unit 1 Case Study

1. Check the linearity of the Black Box by connecting the DC Power Supply to the input of the Black Box, and the Multimeter to the output of the Black Box, then change the input voltage regularly and notice the changing in the output voltage of the Black Box.
2. Connect the DC Function Generator and channel 1 of the Oscilloscope to the input of the Black Box, and channel 2 of the Oscilloscope to the output of the Black Box to establish a static test and determine the static gain.
3. Build the pervious connection again, but this time change the Function Generator Wave Mode from Sine Wave to Square wave to test the time domain.
4. Observe the step responses on the Oscilloscope when time changes.
5. Compare the experimental model data with the mathematical model data.
6.
Create the same connection as a pervious; however, keep the wave of the Function Generator at Sine Wave. Select the Function Generator frequency and change it steadily to test the frequency domain.
7. Observe the outcome voltages and frequencies for channel 2 of the Oscilloscope.
8. Compare the experimental data with the mathematical data to check the frequency domain test
9. Import data into the Matlab for