Wash hands thoroughly before leaving the laboratory.First, prepare a data table. Record what you see throughout the laboratory activity.…
Virtual Lab Stimulation Exercise 3 Activities 1-5 Study online at quizlet.com/_cfevi 1. 2. 3. 4. 5.…
It is imperative to use goggles, aprons, and closed toe shoes for this lab. The chemicals in this lab are harmful and can cause serious injury and irritation. This lab uses a strong sodium Hydroxide and can burn the skin. If this should happen to occur wash thoroughly.…
Be sure to review this important presentation before attempting this assignment (you may be prompted for your FLVS User Name and Passcode to begin):…
Please explain the purpose of this lab. Include in your explanation the major concepts you learned and any safety concerns associated with the lab.…
There is a door that can be closed to keep visitors out of the lab while work with the agents is in progress. Hazard warning signs may be posted on the door indicating any hazards that may be present, including radioactive materials, lazar lights, high noise emitting equipment, or toxic chemicals. There is a hand-washing sink available, preferably near the door. Waste materials are segregated according to hazard…
* Safety, no exposed skin, always wear gloves, Wear long sleeves, long pants, closed shoes, and goggles, always work 6 inches inside the hood, cover chemicals when transporting between hoods, report any accidents immediately, use Aspirator when solvent is Organic, Use Vacuum when solvent is Aqueous, neutralize all acids and bases for cleanup and disposal…
Answer the questions located at the end of the virtual lab activity. Be sure to record your answers in your lab report.…
4. From the introduction to this lab, you know that there are typically five steps involved in the water treatment process. Identify the processes (e.g., coagulation) that were used in this lab and describe how they were performed.…
Explain why you did this lab and what if any safety precautions needed to be followed.…
After performing each lab I have a much better understanding on what is expected and how to carry our future labs. I learned measuring techniques and although there is much room for improvement on my part, I think I have a good sense of what to expect and how to appropriately calculate my experimentations. The lab that I struggled with the most was the one represented in Table 9. I found the calculation of molarity to be a little confusing. I had a hard time producing results on this particular lab. I continued to redo it in attempt to get the correct calculations. I hope that I can take with me into future lab assignments the tools and know how to produce successful labs and results.…
Instructions: Enter the Virtual Lab, and conduct the experiments provided before going out into the virtual field for additional research. Please type your answers on this form. When your lab report is complete, submit it to the Submitted Assignments area of the Virtual Classroom.…
In this simulation, you will be looking at the production of carbon dioxide as a plant photosynthesizes. Oxygen is…
When doing this lab it is very important that you wear safety goggles, gloves and an apron. When working with pH it is important that you do not ingest this chemical and it does not get into your eyes or on your skin. If ingested make sure you contact medical assistance and provide bottle so they will know. If in eyes remove contact lenses and rinse repeated until it stops burning. Lastly if on skin wash with soap and water and remove contaminated clothing. If irritation occurs seek medical assistance. Do not allow humans or animals to intake this chemical. Make sure there is adult supervision when conducting this…
Explain why you did this lab and what if any safety precautions needed to be followed.…