Separation of a Mixture of Solids My Flow Chart First remove iron filings with magnet since this is the only substance in the mixture that it is magnetic and will be attracted to a magnet. Second remove the sand by adding the mixture to hot water‚ which the other two substances are soluble. Third remove the benzoic acid since this is less soluble in cold than salt by cooling the mixture in the heated water. This will then leave the table salt behind in the water as the last substance.
Premium Water Flowchart Evaporation
Lab 2: Separation of Mixtures and Solids Purpose: The purpose of this lab is to become familiar with the separations of mixtures and solids. Pre-lab predictions: Data: Data Table 1: Experiment Data | | Grams | Percentage of Mixture | Iron Filings | 2.0g | 26.67% | Sand | 1.6g | 21.33% | Table Salt | 2.4g | 32.00% | Benzoic Acid | 1.2g | 16.00% | Total | 7.5g | 96% | Observations: While the water was boiling with the three solids (salt‚ benzoic acid‚ and sand) the water got
Premium Water
Ocean county college | SEPERATION OF A MIXTURE OF SOLIDS | DEPARTMENT OF CHEMISTRY | | John Curran | 2/23/2013 | COURSE INSTRUCTOR DR. NANCY MARASHI. | Background: During this experiment students will take a mixture and separate it into its’ pure substances. A mixture is a combination of two or more substance. These substances cannot be combined chemically but more physically. The pure substances are substances that cannot be separated any more by physical means. The students
Premium Water
of Liberal Arts and Sciences Experiment #3 SEPARATION AND PURIFICATION OF ORGANIC COMPOUNDS: CRYSTALLIZATION Gomez‚ Paola Anne M. DOP: 2 July 2013 Student no. : 4120403 DOS: 9 July 2013 Group: Carcinogenic Remarks: _____________________________________________________________________ Engr. C. D. Sanchez Instructor THEORETICAL DISCUSSION Crystallization is a technique which chemists use to purify solid compounds. It is one of the fundamental procedures each chemist
Premium Chemistry Solution Solubility
09/18/2012 09/19/2012 Title: Separation of Mixtures and Solids Purpose: The purpose of this experiment was to practice the process of separating mixtures of different solids. Procedure: This experiment consisted of different processes to separate a mixture of solids into the four individual solids: sand‚ benzoic acid‚ iron fillings‚ and sodium chloride. To remove the iron fillings from the mixture I used a magnet and scanned it across the entire mixture and the magnet forced picked up
Premium Separation process Evaporation Mixture
LAB 4 – SEPARATION OF A MIXTURE OF SOLIDS Purpose: To determine and execute the separation of mixture of solids through different means. Examples are magnetisms‚ evaporation‚ and filtration. Observations and Experimental Data: Data Table 1: Experiment Data Grams Percent of mixture Iron filings 1.4 g 31.1 % Sand 1.3g 28.9 % Table salt 1.0g 22.2% Benzoic acid .8g 17.8 % Total 4.5g 100% Questions: A. How did your proposed procedures or flow charts
Premium Mixture Water Separation process
Acid Property #1: The word acid comes from the Latin word acere‚ which means "sour." All acids taste sour. Well known from ancient times were vinegar‚ sour milk and lemon juice. Aspirin (scientific name: acetylsalicylic acid) tastes sour if you don’t swallow it fast enough. Other languages derive their word for acid from the meaning of sour. So‚ in France‚ we have acide. In Germany‚ we have säure from saure and in Russia‚ kislota from kisly. Base Property #1: The word "base" has a more complex
Premium Acid Alkali Carbon dioxide
Lab #2 – Separation of a Mixture of Solids Abstract The mixed solution contained benzoic acid‚ iron‚ table salt‚ and sand. When separated using water‚ fuel‚ or a magnet‚ their characteristics and properties changed. The mass of the entire mixed solids was 6.6 grams. When the magnet was used‚ the iron was immediately picked up. The mass for that was 1.7 grams. The table salt was 1.2 grams. Benzoic acid mass was 0.8 grams and the sand was 1.4 grams after being separated. Introduction The objective
Premium Water
used (ml) | 30.6 | 30.2 | 30.0 | | | | | Acid to Base Ratio | 0.87 | 0.86 | 0.86 | Average acid/base ratio | 0.86 | | | | | Base to Acid Ratio | 1.14 | 1.16 | 1.17 | Average base/acid Ratio | 1.16 | Name: Jared Philip Condez Date Performed: June 28‚ July 2 & 5‚ 2013 Partner: Shiela Mae Molina Date Submitted: July 12‚ 2013 Experiment 3 ACID – BASE TITRATION I. Objectives * Determine the purity of Potassium Acid Phthalate * To titrate effectively
Premium Sodium hydroxide PH
Acid Base And Salt Acid Acids:- The word ‘Acid’ came from Latin word ‘Acidus or Acere’ which means sour. Sour taste is the most common characteristic of acid. Acid turns blue litmus paper red. There are many substances which contain acid and hence taste sour‚ such as curd‚ tamarind‚ lemon‚ etc. Types of Acids:- Acids are divided into two types on the basis of their occurrence – Natural acids and Mineral acids. Natural Acid:- Acids which are obtained from natural sources are called natural
Premium Acid Hydrochloric acid PH