Butane Lab Purpose The purpose of this lab is to determine the molar mass of Butane. Materials 1. funnel 2. thermometer 3. bucket 4. butane lighter 5. tap water 6. graduated cylinder 7. electronic balance Procedure 1. Rinse bucket and fill it ¾ way 2. Rinse glassware 3. Place thermometer in tray 4. Record pressure of Mercury 5. Record temperature
Premium Pressure Gas Ideal gas law
Light Microscopy Lab Lab write-up 1 Parveen Rajper Biology 101 Principles of Biology 1 September 29‚ 2012 Introduction: The light microscope helps see the microscopic world that the naked eye cannot see. If there were no microscopes in the world‚ than it would be very difficult to understand the many particles that surround the living world. The purpose of this lab experiment is to become familiar with a microscope. It is hypothesized that it will be difficult
Premium Microscope Lens Optics
Lab report is one way we used during of after an experiment in a laboratory to subtly record and discuss the experiment. During a lab‚ we sometimes can observe only the physical part of the experiment‚ or may be some visible chemical changes. These changes indicate that the experiment we do is successful or not. However‚ in order to understand and achieve more from just simply doing the experiment‚ we write lab report to more profoundly understand the internal meanings of the experiment we do‚ and
Premium Critical thinking Thought
Safety Concerns in the Laboratory Safety goggles must be warn at all times during a lab session. This is very important because they protect your eyes from harmful matter such as chemicals‚ glass‚ and fumes. It is very important to note that they must be goggles and not glasses. Safety glasses may protect the eyes from flying debris and splashes but may not protect the eyes from gas fumes or splashes from underneath. Also‚ wearing contact lenses in a chemical laboratory without proper coverage
Premium Chemistry Laboratory Left-wing politics
of Chemistry Lab 8 – Ionic Reactions Submitted by Ryan T. Crawford Date Submitted: 7/10/2014 Date Performed: 7/10/2104 Lab Section: Chem-181DL1 Course Instructor: Amal Bassa Purpose: The purpose of the particular is to study the nature of ionic reactions and to learn how to write balanced equations and to learn how to write net ionic equations for precipitation reactions. Procedure: For this particular lab experiment‚ I
Premium Chemistry Chemical reaction Laboratory
Utilizing the Lab Results PS2200 - Criminal Investigation Unit 04 Assignment 01 As the lead homicide investigator for this case I had recently learned that the crime lab has concluded that the finger print that was recovered belonged to the boyfriend‚ they were from a piece of notebook paper found under the body of the victim. Interviews are conducted in criminal cases for the purpose of gathering information from people who have‚ or may have‚ knowledge needed in the investigation. (Swanson
Premium Criminal law Arrest warrant Scientific method
The lab in which we conducted last Tuesday was an analysis of a hydrate and what happens to it when it is heated. A hydrate is a crystalline compound which water molecules are chemically bound to it. In the lab‚ we were to analyze the difference in grams of the hydrate and the anhydrate. An anhydrate is the crystalline compound without the water molecules bound to it. During our lab‚ we were to heat up the crucible‚ the crucible with hydrate‚ and the crucible with an anhydrous and write down each
Premium Water Laboratory equipment
esterification reaction that was carried out in this lab is shown in figure 1. It worth mentioning that the by-product of such reaction is water. In organic chemistry‚ the reaction in which water molecule is released is known as condensation reaction (Hornback‚ 2006). Figure1 is drawn using Chem Sketch software. a) b) Figure 1: Typical Fischer esterification reaction (a) in comparison to the specific esterification reaction used in this lab (b) The reaction can also be categorized in terms of
Premium Acetic acid Carboxylic acid Ester
Timothy Johns Christian Howard Wan Huang 10/18/12 Flame Test Lab Introduction Spectroscopy is the study of the electromagnetic radiation emitted or absorbed by atoms and molecules. These studies are very helpful in determining an unknown element‚ given the fact that all elements burn a different color. The flame colors vary because of the different amounts of energy the elements give off. This lab is made for the learner to determine the identity of two unknown elements. Hypothesis If
Premium Sodium chloride Potassium Metal
Collision Lab Simulation Purpose: To study elastic and inelastic collisions in one-dimension. Background Information: Momentum: is a measure of mass in motion. It is the product of mass x velocity. Conservation of Momentum: in the absence of external forces‚ such as friction‚ the linear momentum of a system remains constant. Procedure: 1. Open web browser and go to the site: http://phet.colorado.edu 2. Click “play with sims”‚ then “physics”‚ and then “motion” 3. Find the “Collision Lab” 4
Premium Classical mechanics Inelastic collision Kinetic energy