Preview

Health And Safety In Vistron

Good Essays
Open Document
Open Document
1253 Words
Grammar
Grammar
Plagiarism
Plagiarism
Writing
Writing
Score
Score
Health And Safety In Vistron
Vistrion Manufacturing Ltd

Introduction
This report is going to explain Health and Safety roles in organisation
Why it is important to be alert to potential hazards when dealing with machinery, equipment and substances such as toner and fluids
Everybody needs to be aware of potential hazards like dangerous equipment or substances so that their work area can be made safe and eliminated accidents. People have to be trained to use all machinery which is needed at work so that it is used correctly and does not pose a risk to yourself and others. Identifying and following procedures should be practised in the work place. Organizational practices that promote safety can also help a company establish competitive advantage by reducing costs of absenteeism due to accidents and complying with safety laws. People who are working in our company have to recognise the risks when using substances such as toner or correcting fluids. These should be dearly labelled so they are not used for other purposes. They should be securely closed to reduce risk of leaking and they should be safety stored so they are not knocked over by mistake. All office equipment has to be used as intended and safety procedures have to be conducted i.e. laminator should be used only to secure important documents and cannot be touched after use as it may be hot. Do not put your hands too close to shredder machine as you may be hurt and only waste confidential papers can be placed into it.
All employees in Vistron Company are concern about The Health and Safety (Display Screen Equipment) Regulations 1992 which protect the health of people who work with DSE. The Regulations were introduced because DSE has become one of the most common kinds of work equipment. Display Screen Equipment (DSE) is a device or equipment that has an alphanumeric or graphic display screen, regardless of the display process involved; it includes both conventional display screens and those used in emerging technologies such as

You May Also Find These Documents Helpful

  • Satisfactory Essays

    Q - State why and when health and safety control equipment, identified by the principles of protection, should be used relating to types, purpose and limitations of each type, the work situation, occupational use and the general work environment, in relation to:…

    • 260 Words
    • 2 Pages
    Satisfactory Essays
  • Satisfactory Essays

    Equipment within the office needs to be used following any guidelines from the manufacturer/organisation to eliminate any risks of somebody harming themselves and to keep any equipment in good condition.…

    • 484 Words
    • 2 Pages
    Satisfactory Essays
  • Satisfactory Essays

    Unit 4222-264 Answers

    • 302 Words
    • 2 Pages

    Our place of work should have clear written policies and procedures of health and safety. As practitioners we should oversee all health and safety checks regularly. Indoor and outdoor equipment should be checked before and after use. The environment we are using shoul also be checked. Eg, is the glass or gardening tools lying around the garden, are their bricks or toys on the floor on which some one could trip.…

    • 302 Words
    • 2 Pages
    Satisfactory Essays
  • Good Essays

    You must not interfere with or misuse anything that is provided for health and safety.…

    • 693 Words
    • 3 Pages
    Good Essays
  • Good Essays

    Use approved methods and procedures when undertaking potentially hazardous work activities, including using correct moving and handling techniques wearing correct personal protective clothing appropriate to the situation, environment and activities using and storing equipment and materials dealing with spillages and disposal of waste.…

    • 356 Words
    • 2 Pages
    Good Essays
  • Good Essays

    Because we have these controlled products in our work place we must implement a system of communication called Workplace Hazardous Materials Information System (WHMIS). This is law and just plain smart to protect our workers. The WHMIS system gives the worker information on the exact identity of the hazardous material they are working with, how it might affect their health, the way to protect them against the material, what to do in case of an emergency involving the substance and what first aid measures needed if in contact with it.…

    • 1575 Words
    • 7 Pages
    Good Essays
  • Powerful Essays

    Unit 4222-306 Answers

    • 1450 Words
    • 6 Pages

    2. The main points of health and safety policies and procedures agreed by my employers are that they will ensure the work place is safe, ensure that there is safe access to and from the work place, provide information on health and safety and that staff have the correct training, also they must ensure that risk assessments…

    • 1450 Words
    • 6 Pages
    Powerful Essays
  • Powerful Essays

    Err Assignment

    • 2007 Words
    • 9 Pages

    The employer must ensure that the environment and equipment etc. is safe for staff to use, to prevent injuries, but it is also the duty of the employee to raise awareness of…

    • 2007 Words
    • 9 Pages
    Powerful Essays
  • Better Essays

    Questions 641 Answers

    • 1208 Words
    • 6 Pages

    State why and when health and safety control equipment, identified by the principles of protection, should be used relating to types, purpose and limitations of each type, the work situation, occupational use and the general work environment, in relation to:…

    • 1208 Words
    • 6 Pages
    Better Essays
  • Good Essays

    If safety equipment is provided, then staff must ensure it is used at all times e.g if gloves are provided for using hazardous materials in science, then they must be worn.…

    • 746 Words
    • 3 Pages
    Good Essays
  • Powerful Essays

    Miss

    • 2737 Words
    • 11 Pages

    Machinery, tools or materials- Machinery should be guarded correctly with the appropriate controls fitted ( including emergency stops and interlocks). Routine inspection and effective defect reporting system will also help reduce misuse and minimise risk. Adequate training for all equipment is the best way to ensure your employees are using machinery in the appropriate way.…

    • 2737 Words
    • 11 Pages
    Powerful Essays
  • Good Essays

    mu.24

    • 775 Words
    • 3 Pages

    Employers have a duty to make sure that the workplace is as safe as they can make it and also display a Health and Safety Law poster or supply employees with a leaflet with the same information. This is available from the health and safety executive. As an employee you will have a duty to work safely. You may be given some guidance about how to use the equipment you will need to follow them so that you are not putting others in danger or at risk.…

    • 775 Words
    • 3 Pages
    Good Essays
  • Good Essays

    Recognise hazards associated with the workplace that have not been previously controlled and report them in accordance with organisational procedures.…

    • 713 Words
    • 3 Pages
    Good Essays
  • Powerful Essays

    The Management of Health and Safety at Work Regulations 1999 clarify in more general terms what employers are required to do to manage health and safety. If there is falls or injuries in the workplace it highlights the hazards and protects the employee against discrimination in the workplace. Exposure to hazardous agents such as dust, fumes, noise, vibration, radiation or harmful micro-organisms must be eliminated or adequately controlled. All work equipment must meet essential safety requirements and safe systems of work must be established. Risks from work with Display Screen Equipment must be assessed and controlled, appropriate personal…

    • 1431 Words
    • 6 Pages
    Powerful Essays
  • Powerful Essays

    Better Health and Safety for Suppliers Case Abstract This case study focuses on the “Better Health and Safety for Suppliers” project and how Volkswagen AG seeks to strengthen their policy in Health Protection, Promotion and Occupational Safety by promoting social protection, improving safety and health standards and strengthening labour inspection. The project is a partnership project between Volkswagen, the International Labour Organization and the German Corporation for Technical Cooperation. The project entails first facilitating the participation of selected Volkswagen suppliers in Brazil, Mexico and South Africa in audits with respect to Occupational Safety and Health in their workplace. Based on the findings of these initial audits, several recommendations are given and used to generate a checklist for a second review (conducted up to 6 months after the initial audit). A report is then created which documents the audit findings, including any improvements that have taken place at such supplier. When all the suppliers have been assessed, best practices and solutions found across all project countries will be developed and collected into an online network. This network will provide the necessary information on health and safety for the countries and enterprises involved. The ultimate goal of the project is the development of an international guideline for Occupational Safety and Health and supply chain management. The aim is to provide expert knowledge by developing an information and consultation network. The network can be accessed by those who require advice on problems regarding Occupational Safety and Health and will provide information about best practices and lessons learned. The…

    • 7497 Words
    • 30 Pages
    Powerful Essays