Starch Lab

Introduction: In this lab i used glucose and starch to show if the cell membrane is permeable, impermeable, or selectively permeable to these substances. Dialysis tubing is a plastic like substance that has small pores in it. These pores allow certain chemicals to flow into and out of the cells. The size of the molecule determines what goes through the tubing. On of the materials that we will be using is glucose. glucose is a simple sugar that easily dissolves in water. To test for the presence of glucose we will use glucose test strips. The strip will change from an aqua blue color to a brown color if there is glucose in the solution. Starch is a complex molecule that forms from a suspension in the water. To test for the presence of starch I will use Lugol's iodin. When it comes in contact with the water and turns black or blue thats how you know that starch is present.
Hypothesis: We tested the cell membrane to see if it was permeable or impermeable to glucose, and
We tied one end of the glucose tubing, and put 2 inches of glucose solution into it then we tied the other side into a knot to close it up. With the second dialysis tube we did the same thing but with the starch solution. We then weighed the glucose cell, then the starch cell, and recorded the mass into the chart. After that we placed each cell into a seperate cup, and filled it with water. We let the cells sit in the cups overnight. The next day we got our cup with the glucose cell, we took a glucose test strip and dipped it into the water in the cup to test for glucose. Then we took the cell out of the water, weighed it, and recorded it in the chart. We took the cup with the starch cell and tested it for starch by using lugols iodine. We put 4 drops of the iodine into the cup. We took the starch cell and weighed it, then recorded