Aim To investigate the effect of molar mass on the molar heat of combustion of adjacent members of a homologous alcohol series. Introduction Chemists refer to the energy stored in a substance as the heat content or enthalpy of the substance. The heat of reaction is determined by the difference in the enthalpy between the reactants and products. The molar heat of combustion of a substance is the quantity of heat liberated when one mole of that substance is burnt completely in air. In the case
Premium Combustion Ethanol Oxygen
conducted was to analyse the work of a heat exchanger‚ by studying the effects of heat transfer from a hot stream and a cold stream in the heat exchanger. In the experiment we were introduced to the shell and tube heat exchanger and were told of all its parts and how to use them. The experiment started by evaluating what the heat transfer rate for a hot stream and a cold stream was within the heat exchanger. Using this information the experiment went on to analyse the heat exchanger in more detail. The log
Premium Heat transfer Heat exchanger Heat
Cross Flow Heat Exchanger Experiment By Andres Rodriguez Abstract The design project of the group was to create an experiment for Thermo/Fluids Laboratory. The experiment will help aide the students in relating pressure drop and heat transfer in a cross flow heat exchanger. The experiment consists of three cross flow heat exchangers (bare inline‚ bare staggered‚ and finned staggered) that will cool hot water with current fan in the Laboratory. Optimal flow rates‚ pressure and temperature
Premium Heat transfer Heat exchanger Heat
Heat Conduction along a Composite Bar Objective To study the conduction of heat along a composite bar and evaluate the overall heat transfer coefficient. Theory Thermal conduction is the mode of heat transfer which occurs in a material by virtue of a temperature gradient within it. A solid is chosen for the demonstration of pure conduction since both liquids and gasses exhibit excessive convective heat transfer. In a practical situation‚ heat conduction occurs in three detentions‚ a complexity
Premium Heat Heat transfer Thermal conductivity
HIGH ALBEDO HEAT REFLECTIVE PAINT Sunsheetal® is based on polyurethane-acrylic blended elastomeric aqueous polymers. It is a high thermal emittance ceramic coating useful in the world of industrial and commercial buildings‚ as a roof coating system that has the ability to reflect the visible‚ infrared and ultraviolet wavelengths of the sun‚ thereby reducing heat transfer to the building. Sunsheetal® is defined as a cool roof coating by virtue of its ability to radiate absorbed‚ or non-reflected
Premium Humidity Heat Temperature
The topic I have chosen to look at in this essay is to "discuss the principal ways in which heat is gained by and lost from the body‚ and explain the various mechanisms involved in regulation of body temperature. Briefly indicate how excessive cold and heat affect the body". The body gains and loses heat through the external environment by radiation‚ conduction‚ convection and evaporation of water. These are all physical mechanisms known to the human body. (Vander‚ Sherman & Luciano 1998). Radiation
Premium Thermoregulation Blood Heat transfer
Experiment 8 - Free & Forced Convection Convection Heat Transfer.doc EXPERIMENT ON FREE AND FORCED CONVECTION HEAT TRANSFER 8.1 OBJECTIVES To study experimental data for heat transfer in order to evaluate the overall heat transfer coefficients and heat balances for the following cases of heat transfer in a .shell and tube heat exchanger. (a) Natural convection and (b) Forced convection. 8.2 THEORY A basic diagram of a shell and tube heat exchanger is shown in Figure 8.1. Here steam at a temperature
Premium Heat transfer Convection Heat exchanger
Specific Heat: The specific heat is the amount of heat per unit mass required to raise the temperature by one degree Celsius. The relationship between heat and temperature change is usually expressed in the form shown below where c is the specific heat. The relationship does not apply if a phase change is encountered‚ because the heat added or removed during a phase change does not change the temperature. Q=mcTDelta Abstract: In this experiment we are trying to determine the
Premium Temperature Thermodynamics
Solutions to Problems (Übungen) to Lecture-1 of Lecture Series “Heat Transfer – 1” Institut für Energieverfahrenstechnik und Brennstofftechnik‚ TU Clausthal‚ SS 2005 1.1 A heat rate of 5 kW is conducted through a cross section area of 20 m2 and thickness of 3 cm. If the inner (hot) surface temperature is 600ºC and the thermal conductivity of the material is 0.5 W/mK‚ what is the outer surface temperature? Solution: Tout = 585 °C 1.2 The heat flux through a wood slab 50 mm thick‚ whose inner and outer
Premium Heat Heat transfer Temperature
latent heat of fusion for water Specific latent heat is the amount of heat energy that is needed to change the state of one kilogram of a specific substance‚ whether it’s boiling or melting‚ without increasing or decreasing the temperature of the substance. Specific latent heat of fusion is the amount of heat energy that is needed to change a specific substance from solid to liquid. The specific latent heat of fusion for water is 334 KJ/ KG. Each substance has its own specific latent heat of fusion
Premium Specific heat capacity Energy Thermodynamics