Acid/ Base Titration Lab Design III Materials: Goggles HCl NaOH Distilled Water Label Beaker Graduated Cylinder Pipet Stirring rod Buret with clamp Stopper Ring Stand Utility Clamp Computer Computer Program pH probe Procedure: 1) 2) Goggles were put on. 3) 0.1 M NaOH solution was made using 0.4 g NaOH and 100 mL distilled water. The ingredients were added together in a beaker and stirred. 4) The buret was standardized by adding 10 mL of distilled water‚ rolling
Premium Sodium hydroxide Base Laboratory glassware
Baccalaureate Department Group 4 – Chemistry SL Lab no.2: Acid-base titration Student: Caterina Rende Dominis Teacher: Zrinka Toplićan Date: 19 November 2012 Data Collection and Processing (DCP) Aspect 1: Recording raw data Table 1 Table showing raw data collected from titration Known measurements 25 mL of diluted acid 0‚100 M of NaOH solution Measurement Number | V of alkali needed to neutralize acid /mL/ (±0.01 mL) | 1 | 26.4 | 2 | 26.1 | 3
Premium Sodium hydroxide Base
Acid-Base Titration and Volumetric Analysis The purpose of this experiment is to determine the [NaOH] of a solution by titrating it with standard HCl solution‚ to neutralize a known mass of an unknown acid using the NaOH solution as a standard‚ to determine the moles of NaOH required to neutralize the unknown acid‚ and to calculate the molecular mass of the unknown acid. Procedure: Part A: Standarized 0.10M HCl solution and unknown NaOH solution were poured into two beakers. The burets
Free PH indicator Titration Concentration
Thermochemistry Lab #2 - Heat of Reaction - Hess’s Law Return The foundation of the study of thermochemistry was laid by the chemist Germain Hess‚ who investigated heat in chemical reactions during the last century. One statement of the law that bears Hess’s name says: The enthalpy change for any reaction depends on the products and reactants and is independent of the pathway or the number of steps between the reactant and product. In this experiment‚ you will measure and compare
Premium Sodium hydroxide Chlorine Hydrochloric acid
Piumbroeck Chem 214 Acid-Base Titration‚ Determination of Carbonate and Bicarbonate in a water sample Introduction The purpose of this lab is to determine the concentration of two bases‚ carbonate and bicarbonate‚ by using a potentiometric titration. We can determine the concentration of the bases in the reactions ( H+ +CO3- < ==> HCO3- and H+ + HCO3- < ==> H2CO3-) by the way the pH of the solution changes. The way the pH changes when a strong acid is added can be used to
Free Carbon dioxide Bicarbonate Acid
Titration Lab Introduction The purpose of this lab is reach and be able to calculate the equivalence point when we use titration to neutralize a base with acid. The process of the lab was determining the volume of a solution needed to react with a given mass or volume of a sample is called titration. The equivalence point is when the same number of moles of acid and moles of base has been added. Phenolphthalein is used as an indicator because it will have a color change when the equivalence point
Premium Titration Base PH indicator
Titration Lab A Titration is a process of the concentration of one solution being determined by its reaction with either a standard solution or a known quantity of solid dissolved in solution. It may also be used to calculate the molar mass of an unknown acid or base. Purpose: I. Prepare a standard solution of sodium hydroxide II. Standardize a sodium hydroxide solution by using potassium hydrogen phthalate (KHP) III. When given whether the acid is monoprotic‚ diprotic‚ or triprotic
Premium Chemistry Sodium hydroxide Base
Acid-Base Titrations A Titration of Potassium Hydroxide Phthalate and Sodium Hydroxide Hanna Piper Department of Chemistry‚ SUNY College at Brockport‚ Brockport‚ NY 14420 Chemistry 205.06 Abstract Titrations are used to find the molarity of an unknown solution. A titration begins with an analyte and titrant being used to measure the unknown molarity of the analyte. In the following experiment‚ sodium hydroxide was used as the titrant and potassium hydroxide phthalate was used as the
Premium Sodium hydroxide Titration Chemistry
inspecing the switch of water and electricity‚ and closing the window. 5) write the experiment report according to the primary record and turn in. Laboratory safety regulations 1) Corrosive acids and alkali must be treated carefully‚ and be sure not to splash on clothes‚ skin and eyes. While diluting strong sulfuric acid‚ the acid should be poured slowly into the water with stirring‚ but not water into the acid. 2）It’s not allowed to handle solid drugs with the hand directly. Don’t mix different kinds
Free Titration Laboratory glassware
Acid-Base Titrations February 21‚ 2013 Abstract: With the given volume measurement of KHP and NaOH‚ the students experimented to calculate the mass of unknown acid and its equivalence point using a method called titration and titration curve. The known volume of an acid solution would be titrated by slowly adding drops of solution into NaOH‚ and the volume of base needed to react with the acid is measured throughout. By using those data‚ the students are able to find what they
Free PH Sodium hydroxide Titration