Lab #2 – Separation of a Mixture of Solids Abstract The mixed solution contained benzoic acid‚ iron‚ table salt‚ and sand. When separated using water‚ fuel‚ or a magnet‚ their characteristics and properties changed. The mass of the entire mixed solids was 6.6 grams. When the magnet was used‚ the iron was immediately picked up. The mass for that was 1.7 grams. The table salt was 1.2 grams. Benzoic acid mass was 0.8 grams and the sand was 1.4 grams after being separated. Introduction The objective
Premium Water
Separation of a Mixture Do-Your-Own-Lab What you will need to do: 1. Create a flow chart for the separation of your unknown mixture – BERFORE doing lab 2. Create data table – BEFORE doing lab 3. Do lab 4. Analyze data – calculate percent composition of your unknown mixture = 15 points = 30% 5. Write a complete lab report = 35 points = 70% 1. A flow chart is often used to illustrate the steps involved in the separation of a mixture. Flow charts are constructed BEFORE
Premium Separation process Mixture Distillation
Separation of a Mixture of Solids I really enjoyed this lab. After reading the introduction I started by making my own flow sheet of how I thought this lab would work. I was reminded about solubility which is defined as the amount of the solute that will dissolve in a given amount of solvent and that the extent to which a substance dissolves depends mainly upon the physical properties of the solvent and of the solute and to some extent upon the solvent’s temperature. With that being said I came
Premium Solubility Oxygen Solvent
LS Separation of Mixtures and Solids Purpose: To become familiar with the separation of mixtures of solids Hypothesis: I will be able to separate the materials using a variety of different methods. First‚ separate the iron fillings using a magnet. Second‚ I will put the rest of the solution into water and separate the insoluble sand from the soluble salt and benzoic acid. Third‚ I will filter out the benzoic acid when crystalized. Lastly‚ I will evaporate the water away leaving crystallized
Premium Water Sodium chloride
Experiment 2: Separation of a Mixture of Solids Purpose: This experiment allowed me to learn different separation techniques for various substances based on their specific chemical properties. Procedure: I began this experiment by using a magnet to pick up and collect the iron filings out of the mixture. Then the sand was separated by placing the mixture into a beaker and boiling it in distilled water in order to dissolve the salt and benzoic acid‚ once boiling the liquid was poured out leaving
Premium Water Distillation
Ocean county college | SEPERATION OF A MIXTURE OF SOLIDS | DEPARTMENT OF CHEMISTRY | | John Curran | 2/23/2013 | COURSE INSTRUCTOR DR. NANCY MARASHI. | Background: During this experiment students will take a mixture and separate it into its’ pure substances. A mixture is a combination of two or more substance. These substances cannot be combined chemically but more physically. The pure substances are substances that cannot be separated any more by physical means. The students
Premium Water
Nupoor Matieda October 10‚ 2014 PD 9/10 Lab Report Separation of a Mixture of Sand and Salt Goal(s): To separate a mixture of sand and salt and to find the percent of each component by mass of each mixture Background Theory: A mixture is a combination of two or more pure substances in which each pure substance retains its individual chemical properties. Mixtures can be separated by physical processes such as filtration and evaporation. Filtration is a process where solids
Premium Mixture Separation process Water
Separations of the Components of a Mixture January 9‚ 2013 Hailey Rounds Partners: Kelsy Shay Katie Nelson Objectives: The purposes of this experiment are to separate two components in a mixture‚ specifically sodium chloride and silica‚ and find the correlating percent composition of each. Abstract: This experiment consisted of the separation of sodium chloride and silica. The mixture was separated by extracting the sodium chloride with water and drying both substances. Adding water to
Premium Water Sodium chloride Evaporation
experiment introduces magnetism‚ evaporation and filtration as ways to separate mixtures. Temperature when soluble Sand N/A Iron N/A Sodium Chloride 400F Benzoic Acid 100F Experiment and Observation After gathering all the material needed to conduct these experiments‚ the first experiment was initiated. The mixture of solids was weighed out as well as the 10cm square piece of paper and the weighing dish. The mixture was spread out in a very thin layer on a piece of paper‚ the magnet was
Premium Water Salt Filter paper
Experiment 3Quantitative Separation of Mixtures This experiment performs the quantitative separation of thecomponents of a mixture. A mixture is the mixing of two or more substancestogether. The proportions of the components in the mixture can be varied.And the resulting mixture can be either homogeneous or heterogeneous‚depending on the properties of components such as solubility.In this experiment‚ you are going to separate a water-solublecomponent from water-insoluble components
Premium Separation process Distillation Mixture